Record 1 of 114

Title: Online fabrication scheme of helical long-period fiber grating for liquid-level sensing

Author(s): Ren, KL (Ren, Kaili); Ren, LY (Ren, Liyong); Liang, J (Liang, Jian); Kong, XD (Kong, Xudong); Ju, HJ (Ju, Haijuan); Xu, YP (Xu, Yiping); Wu, ZX (Wu, Zhaoxin)

Source: APPLIED OPTICS  Volume: 55  Issue: 34  Pages: 9675-9679  DOI: 10.1364/AO.55.009675  Published: DEC 1 2016  

Abstract: We present a novel online fabrication scheme of helical long-period fiber gratings (H-LPFGs) by directly twisting a standard single-mode fiber (SMF) in a microheater. This is done by taking advantage of the inherent core-cladding eccentricity in SMF. We adopt a fiber optic rotary joint to eliminate the accompanying twisting spiral for real-time spectral monitoring and a stepping mechanical system to accurately control the twisting length in fabrication. As a consequence, low-cost and high-quality H-LPFGs can be readily fabricated. Meanwhile, by using this kind of H-LPFG, we design a simple and low-cost wavelength-interrogated liquid-level sensor with a high sensitivity of 0.1 nm/mm. (C) 2016 Optical Society of America

Accession Number: WOS:000388938200031

PubMed ID: 27958456

Conference Title: Biennial Conference on Applied Optics on Advanced Infrared Technology and Applications (AITA)

Conference Date: SEP 29-OCT 02, 2015

Conference Location: Pisa, ITALY

Author Identifiers:

ISSN: 1559-128X

eISSN: 2155-3165

Record 2 of 114

Title: Growth of SiC nanowires by low pressure chemical vapor infiltration using different catalysts

Author(s): Men, J (Men, Jing); Liu, YS (Liu, Yongsheng); Luo, R (Luo, Rong); Li, WN (Li, Weinan); Cheng, LF (Cheng, Laifei); Zhang, LT (Zhang, Litong)

Source: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY  Volume: 36  Issue: 15  Special Issue: SI  Pages: 3615-3625  DOI: 10.1016/j.jeurceramsoc.2016.04.004  Published: NOV 2016  

Abstract: SiC nanowires were synthesized by LPCVI using different catalysts, and the influences of input gas ratio (alpha) and catalysts were investigated. The average diameter firstly decreased and then increased with increasing alpha. Under Ni-based catalysis, SiC nanowires were long and thin, and increased with increasing concentration; under Fe-based catalysis, they were short and thick, and the influence of concentration could be neglected. The growth of SiC nanowires was controlled by vapor-liquid-solid (VLS) growth mechanism and the liquid-solid interface between nanowire and metal droplet was the growth plane. At same concentration, the diameter grown under Ni-based catalyst decreased with decreasing diameter of catalyst droplet, while under Fe-based catalyst, the diameters were not affected by catalyst droplet because of the high concentration. SiC nanowires were synthesized in 2D C/SiC composites and could enhance the mechanical properties effectively because of energy consuming from the fracture, pulled up and debond of SiC nanowires. (C) 2016 Elsevier Ltd. All rights reserved.

Accession Number: WOS:000381951200009

Conference Title: 1st Sino-German Symposium on Preparation and Application of Ultra-High Temperature Ceramic Matrix Composites

Conference Date: JUL 26-31, 2015

Conference Location: Darmstadt, GERMANY

Conference Sponsors: Tech Univ Darmstadt, Sino German Ctr Res Promot

Author Identifiers:

ISSN: 0955-2219

eISSN: 1873-619X

Record 3 of 114

Title: Influence of Driving Frequency on the Argon Dielectric Barrier Discharge Excited by Gaussian Voltage at Atmospheric Pressure

Author(s): Xu, YG (Xu, Yonggang); Jiang, WM (Jiang, Weiman); Tang, J (Tang, Jie); Zhu, S (Zhu, Sha); Wang, YS (Wang, Yishan); Li, YF (Li, Yongfang); Zhao, W (Zhao, Wei); Duan, YX (Duan, Yixiang)

Source: IEEE TRANSACTIONS ON PLASMA SCIENCE  Volume: 44  Issue: 11  Special Issue: SI  Pages: 2553-2563  DOI: 10.1109/TPS.2016.2572733  Part: 1  Published: NOV 2016  

Abstract: A 1-D self-consistent fluid model was employed to investigate the effect of driving frequency on the discharge characters of a dielectric barrier discharge at atmospheric pressure in argon excited by a periodic Gaussian voltage. The simulation results indicate that there are two discharge modes: 1) Townsend and 2) glow modes in the multipulse discharge and different transitions between them during the discharge take place with the increase in driving frequency. When the driving frequency is 1 kHz, there is a tendency of transition from the Townsend mode through glow and finally back to the Townsend one during the positive half-circle of applied Gaussian voltage. However, the discharge in the half-circle can all along operate in the glow mode with the higher driving frequency. Moreover, when the driving frequency is sufficiently high, there are also distinct fluctuations of spatial performance of the charge densities in the positive column during the glow discharge. This is caused by the fact that a lot of charged particles created in the gas gap have not enough time to drift and diffuse to the dielectric barriers, and then these particles are preserved in the local discharge gap at such a high frequency. A comparison of the spatial and temporal evolutions of the electron density at different driving frequencies indicates that the increase in the driving frequency can enhance the plasma chemistry and also expand its volume.

Accession Number: WOS:000388793800006

Conference Title: 1st Sino-German Symposium on Atmospheric Pressure Gas Discharges and Plasma Applications

Conference Date: OCT 11-17, 2015

Conference Location: Sino German Sci Ctr, Beijing, PEOPLES R CHINA

Conference Sponsors: German Res Fdn, Sino german Ctr, Nat Sci Fdn China

Conference Host: Sino German Sci Ctr

Author Identifiers:

ISSN: 0093-3813

eISSN: 1939-9375

Record 4 of 114

Title: Influence of absorption on stability of terahertz difference frequency generation

Author(s): Huang, N (Huang, Nan); Liu, HJ (Liu, Hongjun); Sun, QB (Sun, Qibing); Wang, ZL (Wang, Zhaolu); Li, SP (Li, Shaopeng); Han, J (Han, Jing)

Source: APPLIED OPTICS  Volume: 55  Issue: 3  Pages: 444-448  DOI: 10.1364/AO.55.000444  Published: JAN 20 2016  

Abstract: This work presents numerical studies of the stability feature of terahertz difference frequency generation (THz-DFG) with a ZnGeP2 crystal using two pump wavelengths. We found that the maximum output of a THz wave is located in the unstable output region because of the competitive equilibrium between the absorption and the gain. Furthermore, the output stability is dependent on the pump stability. Different from the results at the pump wavelength of 9.588 mu m, there is neither an appropriate stable output region nor gain saturation region at the pump wavelength of 1.064 mu m for a larger absorption coefficient. This work demonstrates that the stable output region of the THz wave is difficult to obtain when the pump absorption is excessively large in DFG. (C) 2016 Optical Society of America

Accession Number: WOS:000369055100028

PubMed ID: 26835915

Conference Title: OSA Topical Meeting on Digital Holography and 3D Imaging (DH)

Conference Date: MAY, 2015

Conference Location: Shanghai, PEOPLES R CHINA

Author Identifiers:

ISSN: 1559-128X

eISSN: 2155-3165

Record 5 of 114

Title: Ultrafast Interrogation of Fully Distributed Chirped Fibre Bragg Grating Strain Sensor

Author(s): Ahmad, EJ (Ahmad, Eamonn J.); Wang, C (Wang, Chao); Feng, DJ (Feng, Dejun); Yan, ZJ (Yan, Zhijun); Zhang, L (Zhang, Lin)

Book Group Author(s): IEEE

Source: 2016 IEEE PHOTONICS CONFERENCE (IPC)  Book Series: IEEE Photonics Conference  Pages: 482-483  Published: 2016  

Abstract: A novel ultrafast and high spatial-resolution interrogation method for fully distributed chirped fibre Bragg grating sensors based on photonic time-stretch frequency-domain reflectometry is presented. Real-time interrogation at measurement speed of 50 MHz with a spatial resolution of 35 mu m was experimentally demonstrated.

Accession Number: WOS:000406880100222

Conference Title: 29th IEEE Photonics Conference (IPC)

Conference Date: OCT 02-06, 2016

Conference Location: Waikoloa, HI

Conference Sponsors: IEEE

Author Identifiers:

ISSN: 2374-0140

ISBN: 978-1-5090-1906-9

Record 6 of 114

Title: Design of infrared signal processing system based on ZYNQ platform

Author(s): Bai, ZY (Bai Zhuoyu); Leng, HB (Leng Haibing); Hu, BL (Hu Bingliang); Wang, S (Wang Shuang)

Edited by: Gong H; Song A

Source: INFRARED TECHNOLOGY AND APPLICATIONS, AND ROBOT SENSING AND ADVANCED CONTROL  Book Series: Proceedings of SPIE  Volume: 10157  Article Number: 101572N  DOI: 10.1117/12.2246949  Published: 2016  

Abstract: A newly developed real-time infrared signal processing system based on the heterogeneous multi-processor system on chip (MPSoC) is proposed in this paper. The architecture, hardware configuration, image pre-processing algorithms used in the system and the experimental result are presented. Compared to the infrared signal processing system in being, Xilinx Zynq-7000 All Programmable SoC has been used in the proposed system which is more portable, integrated, and has excellent performance during its signal processing.

Accession Number: WOS:000391228600093

Conference Title: International Symposium on Infrared Technology and Application / International Symposium on Robot Sensing and Advanced Control

Conference Date: MAY 09-11, 2016

Conference Location: Beijing, PEOPLES R CHINA

Conference Sponsors: Chinese Soc Opt Engn, Chinese Soc Astronaut, Photoelectron Technol Comm, China High Tech Industrializat Assoc, Photoelectron Industrializat Comm, China High Tech Industrializat Assoc, Dept Cooperat & Coordinat Ind, Acad & Res, SPIE

ISSN: 0277-786X

ISBN: 978-1-5106-0772-9; 978-1-5106-0773-6

Record 7 of 114

Title: Effect of Turntable Structure on Electromechanical Characteristics of Laser Tracker System

Author(s): Cao, EF (Cao, Erfang); She, WJ (She, Wenji); Zhou, L (Zhou, Liang)

Edited by: Hu JW; Ahn JK

Source: PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM ON MECHANICAL ENGINEERING AND MATERIAL SCIENCE  Book Series: AER-Advances in Engineering Research  Volume: 93  Pages: 265-270  Published: 2016  

Abstract: Laser tracker is composed of a mechanical structure and a servo control system. And the characteristics of them all affect the error and stability of the laser tracker measurement system. The cut-off frequency and the response speed are important index to characterize the system performance. Among them, the cut-off frequency is the characterization of the size of the system bandwidth, and response speed is an indicator of system sensitivity. The cut-off frequency is higher, and the response speed is faster. The tracking performance of the tracker is better. Usually, when analyze the cut-off frequency of a system, various components of the control system will be the mathematical modeling, but only the mechanical structure of the inertia as a parameter into the model. It can cause errors in system analysis. In this paper, establish a mechanical and electrical model of the mechanical structure and the control structure to realize the information of the laser tracker system. Analyze the effects of rotating inertia, friction torque and structural rigidity on the characteristics of electromechanical coupling system.

Accession Number: WOS:000391708800045

Conference Title: International Symposium on Mechanical Engineering and Material Science (ISMEMS)

Conference Date: NOV 17-19, 2016

Conference Location: SOUTH KOREA

ISSN: 2352-5401

ISBN: 978-94-6252-277-0

Record 8 of 114

Title: Pedestrian Detection Inspired by Appearance Constancy and Shape Symmetry

Author(s): Cao, JL (Cao, Jiale); Pang, YW (Pang, Yanwei); Li, XL (Li, Xuelong)

Book Group Author(s): IEEE

Source: 2016 IEEE CONFERENCE ON COMPUTER VISION AND PATTERN RECOGNITION (CVPR)  Book Series: IEEE Conference on Computer Vision and Pattern Recognition  Pages: 1316-1324  DOI: 10.1109/CVPR.2016.147  Published: 2016  

Abstract: The discrimination and simplicity of features are very important for effective and efficient pedestrian detection. However, most state-of-the-art methods are unable to achieve good tradeoff between accuracy and efficiency. Inspired by some simple inherent attributes of pedestrians (i.e., appearance constancy and shape symmetry), we propose two new types of non-neighboring features (NNF): side-inner difference features (SIDF) and symmetrical similarity features (SSF). SIDF can characterize the difference between the background and pedestrian and the difference between the pedestrian contour and its inner part. SSF can capture the symmetrical similarity of pedestrian shape. However, it's difficult for neighboring features to have such above characterization abilities. Finally, we propose to combine both non-neighboring and neighboring features for pedestrian detection. It's found that nonneighboring features can further decrease the average miss rate by 4.44%. Experimental results on INRIA and Caltech pedestrian datasets demonstrate the effectiveness and efficiency of the proposed method. Compared to the state-ofthe- art methods without using CNN, our method achieves the best detection performance on Caltech, outperforming the second best method (i.e., Checkerboards) by 1.63%.

Accession Number: WOS:000400012301039

Conference Title: 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

Conference Date: JUN 27-30, 2016

Conference Location: Seattle, WA

Conference Sponsors: IEEE Comp Soc, Comp Vis Fdn

Author Identifiers:

ISSN: 1063-6919

ISBN: 978-1-4673-8851-1

Record 9 of 114

Title: Sub-micron periodically-poled lithium niobate waveguide for integrated nonlinear optics

Author(s): Chang, L (Chang, Lin); Li, YF (Li, Yifei); Volet, N (Volet, Nicolas); Wang, LR (Wang, Leiran); Peters, J (Peters, Jon); Bowers, JE (Bowers, John E.)

Book Group Author(s): IEEE

Source: 2016 CONFERENCE ON LASERS AND ELECTRO-OPTICS (CLEO)  Book Series: Conference on Lasers and Electro-Optics  Published: 2016  

Abstract: We present the first integrable periodically-poled lithium niobate (PPLN) waveguide with a submicron waveguide core that is realized on a silicon nitride thin film lithium niobate platform. Second-harmonic generation based on this device is demonstrated.

Accession Number: WOS:000391286403144

Conference Title: Conference on Lasers and Electro-Optics (CLEO)

Conference Date: JUN 05-10, 2016

Conference Location: San Jose, CA

Author Identifiers:

ISSN: 2160-9020

ISBN: 978-1-9435-8011-8

Record 10 of 114

Title: Stray Light Measurement for Point Source Transmittance of Space Optical Systems

Author(s): Chen, QF (Chen, Qinfang); Ma, Z (Ma, Zhen); Li, XY (Li, Xinyao); Pang, ZH (Pang, Zhihai); Xu, L (Xu, Liang); Li, ZH (Li, Zhaohui)

Edited by: Zhang Y; Wu F; Xu M; To S

Source: 8TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGY: OPTICAL TEST, MEASUREMENT TECHNOLOGY, AND EQUIPMENT  Book Series: Proceedings of SPIE  Volume: 9684  Article Number: 96842V  DOI: 10.1117/12.2243405  Published: 2016  

Abstract: The increased sensitivity of space-based sensors has imposed greater stray light performance goals on telescope design. To meet the demand, a stray light test station for measuring point source transmission (PST) has been built with a lower threshold and higher accuracy. The station is nearly all black with dimensions of 28m long by 8m wide by 9m high. it is coupled with a double cylindrical chamber that reflects the specular light away from the instrument under test. The chamber is a Class 6 cleanroom. The station will allow measuring the instruments with up to a 1 meters diameter, and to perform these measurements at visible and infrared wavelengths. The instrument under test will allow to scan at azimuth angles +/-110 degrees, and at elevation +/-15 degrees. The tests were performed to estimate stray light characteristics of two optical instruments. Test results demonstrated PST performance below 1x10(-7) at visible wavelengths, and 1x10(-6) at infrared wavelengths.

Accession Number: WOS:000387429500103

Conference Title: 8th International Symposium on Advanced Optical Manufacturing and Testing Technology (AOMATT) - Optical Test, Measurement Technology, and Equipment

Conference Date: APR 26-29, 2016

Conference Location: Suzhou, PEOPLES R CHINA

Conference Sponsors: Chinese Opt Soc, Chinese Acad Sci, Inst Opt & Elect, SPIE

Author Identifiers:

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-62841-919-1

Record 11 of 114

Title: Feature fused multi-scale segmentation method for remote sensing imagery

Author(s): Chen, TQ (Chen, T. Q.); Liu, JH (Liu, J. H.); Wang, YH (Wang, Y. H.); Zhu, F (Zhu, F.); Chen, J (Chen, J.); Deng, M (Deng, M.)

Edited by: Wang Y; Zhao J

Source: ADVANCES IN ENERGY, ENVIRONMENT AND MATERIALS SCIENCE  Pages: 741-744  Published: 2016  

Abstract: Image segmentation is a key step in Object-Based Image Analysis (OBIA) for High Spatial Resolution Remote Sensing Imagery (HSRI). Previous segmentation method used image spectrum and structure information only, so that it is difficult to obtain good segmentation results. A novel segmentation method based on multiple feature fusion and multi-scale region merging was proposed in this paper. Firstly, initial over-segmentation objects were obtained by marked watershed transform. Then, the spectrum, texture, shape, area, and edge intensity information were combined to build the merging cost of adjacent objects, and all objects were mapped to adjacent graph nodes with their merging cost. Finally, the nodes in Region Adjacency Graph (RGA) were merged to get multi-scale segmentation result. Experiment results indicate that the proposed method can produce nested multi-scale segmentation results with accurate boundaries, and achieve a better performance compared to Mean-shift and ENVI segmentation method.

Accession Number: WOS:000385792000140

Conference Title: International Conference on Energy, Environment and Materials Science (EEMS)

Conference Date: AUG 25-26, 2015

Conference Location: Guangzhou, PEOPLES R CHINA

ISBN: 978-1-315-64056-3; 978-1-138-02931-6

Record 12 of 114

Title: A novel method to real-time offset correction for frame transfer CCD

Author(s): Chen, Z (Chen Zhi); Wen, Y (Wen Yan); Yao, DL (Yao Dalei); Jiang, BT (Jiang Baotan)

Edited by: Jiang Y; Kippelen B; Yu J

Source: 8TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGIES: OPTOELECTRONIC MATERIALS AND DEVICES  Book Series: Proceedings of SPIE  Volume: 9686  Article Number: 96861L  DOI: 10.1117/12.2242264  Published: 2016  

Abstract: The traditional CCD offset correction processing method is to obtain normal exposure image and dark field image respectively. In the later image processing, use normal exposure image minus the dark field image. Although traditional method can offset correction, but cannot to realize real-time offset correction. Because the traditional method is to obtain offset correction after acquire normal exposure image and dark field image, while the normal exposure image and dark field image is not acquired at the same time. This method would reduce the offset correction precision. A novel method to real-time offset correction for frame transfer CCD is proposed in this paper. The method is based on the improvement of the traditional frame transfer CCD driving timing and CCD signal processing sequence. The traditional frame transfer CCD driving timing is exposure, frame transfer and read CCD level shift register. An offset correction line is added before read CCD data storage area to acquire the offset variation of the each frame image. Take it as a normal image data. In CCD signal processing algorithm to offset calculation and correction. This novel method can correct the offset of each frame image each pixel data real time. In this way the effect on the images from the variation of the offset caused by factors such as the working temperature and the aging of electronic devices in CCD signal processing circuit of CCD camera is restrained.

Accession Number: WOS:000391495500055

Conference Title: 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT) - Optoelectronic Materials and Devices

Conference Date: APR 26-29, 2016

Conference Location: Suzhou, PEOPLES R CHINA

Conference Sponsors: Chinese Opt Soc, Chinese Acad Sci, Inst Opt & Elect, SPIE

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-62841-921-4

Record 13 of 114

Title: Nanostructures on Metallic Glass Surfaces Irradiated by Femtosecond Laser

Author(s): Cheng, GH (Cheng, Guanghua); Zhang, W (Zhang, Wei); Li, C (Li, Chen); Zhang, H (Zhang, Hao); Stoian, R (Stoian, Razvan)

Book Group Author(s): IEEE

Source: 2016 PROGRESS IN ELECTROMAGNETICS RESEARCH SYMPOSIUM (PIERS)  Pages: 2432-2432  Published: 2016  

Accession Number: WOS:000400013902089

Conference Title: Progress in Electromagnetic Research Symposium (PIERS)

Conference Date: AUG 08-11, 2016

Conference Location: Shanghai, PEOPLES R CHINA

Conference Sponsors: Electromagnet Acad, Tongji Univ, Tongji Univ, Depat Elect Sci & Technol, Nanjing Univ Sci & Technol, Shanghai Key Lab Electromagnet Environm Effects Aerosp Vehicle, Sci & Technol Electromagneti Scattering Lab, Univi Tunku Abdul Rahman, Dev & Res Acad Global Opt Neo Technol, Zhejiang Univ, Coll Informat Sci & Elect Engn, IEEE Geoscience & Remote Sensing Soc, Zhejiang Univ, Electromagnet Acad

Author Identifiers:

ISBN: 978-1-5090-6093-1

Record 14 of 114

Title: Low-penalty up to 16-QAM wavelength conversion in a low loss CMOS compatible spiral waveguide

Author(s): Da Ros, F (Da Ros, Francesco); da Silva, EP (da Silva, Edson Porto); Zibar, D (Zibar, Darko); Chu, ST (Chu, Sai T.); Little, BE (Little, Brent E.); Morandotti, R (Morandotti, Roberto); Galili, M (Galili, Michael); Moss, DJ (Moss, David J.); Oxenlowe, LK (Oxenlowe, Leif K.)

Book Group Author(s): IEEE

Source: 2016 OPTICAL FIBER COMMUNICATIONS CONFERENCE AND EXHIBITION (OFC)  Published: 2016  

Abstract: Wavelength conversion of 32-Gbaud QPSK and 10-Gbaud 16-QAM is demonstrated using a 50-cm long low loss spiral Hydex-glass waveguide. BER < HD-FEC threshold is achieved over 10 nm bandwidth with OSNR penalty < 0.5 dB.

Accession Number: WOS:000382938100366

Conference Title: Optical Fiber Communications Conference and Exhibition (OFC)

Conference Date: MAR 20-24, 2016

Conference Location: Anaheim, CA

Author Identifiers:

ISBN: 978-1-9435-8007-1

Record 15 of 114

Title: Detection and Tracking of Multi-space Junk in Star Images

Author(s): Deng, WK (Deng, Wenkang); Song, ZX (Song, Zongxi)

Edited by: Falco CM; Jiang X

Source: EIGHTH INTERNATIONAL CONFERENCE ON DIGITAL IMAGE PROCESSING (ICDIP 2016)  Book Series: Proceedings of SPIE  Volume: 10033  Article Number: UNSP 100330N  DOI: 10.1117/12.2244285  Part: 1  Published: 2016  

Abstract: An algorithm of detection and tracking of multiple small moving space junks under the complex star sequential images is proposed in this paper. Firstly we take image smoothing and adaptive threshold segment to improve the weight of junks. Furthermore, back neighborhood frame correlation (BNFC) is proposed to detect and locate the junk which is sheltered by bigger interfaced stars. Through cross projection method, we could extract the centroid of the moving junks. At last, the Kalman Filter is used to track and estimate the trajectory of moving junks. Experiments show that through this algorithm the multiple small space junks could be detected and tracked effectively and accurately under complex star background with good performance in low error rate and good real-time processing.

Accession Number: WOS:000391694700022

Conference Title: 8th International Conference on Digital Image Processing (ICDIP)

Conference Date: MAY 20-23, 2016

Conference Location: Chengdu, PEOPLES R CHINA

Conference Sponsors: Sichuan Province Comp Federat, Int Assoc Comp Sci & Informat Technol, Chengdu Univ Informat Technol, Chinese Acad Sci, Chengdu Inst Compr Applicat

ISSN: 0277-786X

ISBN: 978-1-5106-0503-9; 978-1-5106-0504-6

Record 16 of 114

Title: The Lightweight Structure Design of a CFRP Mirror

Author(s): Ding, JT (Ding Jiao Teng); Xu, L (Xu Liang); Ma, Z (Ma Zhen); Xie, YJ (Xie Yong Jie); Luo, Y (Luo Yao); Wang, YJ (Wang Yong Jie); Pang, ZH (Pang Zhi Hai)

Edited by: Jiang W; Yang L; Riemer O; Li S; Wan Y

Source: ADVANCED OPTICAL MANUFACTURING TECHNOLOGIES  Book Series: Proceedings of SPIE  Volume: 9683  Article Number: 96831X  DOI: 10.1117/12.2243440  Published: 2016  

Abstract: The advantage of Carbon Fiber Reinforced Polymer (CFRP) is obvious as a common space material for low density, low thermal expansion coefficient and high specific stiffness characteristics, it is the ideal material choice for space optical reflector. Mirror structure with honeycomb can achieve high rates of lightweight, as well as high specific stiffness. For F300mm CFRP mirror, accounting of the actual process properties of CFRP, mirror panels laminated based on thermal stability design, honeycomb fabricated using one innovative inlaying-grafting design method. Finally, lightweight structure design of the CFRP primary mirror completed, the thermal stability result of the F300mm CFRP mirror achieved is 10nm/degrees C.

Accession Number: WOS:000387745800068

Conference Title: 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies - Advanced Optical Manufacturing Technologies

Conference Date: APR 26-29, 2016

Conference Location: Suzhou, PEOPLES R CHINA

Conference Sponsors: Chinese Opt Soc, Chinese Acad Sci, Inst Opt & Elect, SPIE

Author Identifiers:

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-62841-918-4

Record 17 of 114

Title: Experimental verification of the HERD prototype at CERN SPS

Author(s): Dong, YW (Dong, Yongwei); Quan, Z (Quan, Zheng); Wang, JJ (Wang, Junjing); Xu, M (Xu, Ming); Albergo, S (Albergo, Sebastiano); Ambroglini, F (Ambroglini, Filippo); Ambrosi, G (Ambrosi, Giovanni); Azzarello, P (Azzarello, Philippe); Bai, YL (Bai, Yonglin); Bao, TW (Bao, Tianwei); Baldini, L (Baldini, Luca); Battiston, R (Battiston, Roberto); Bernardini, P (Bernardini, Paolo); Chen, Z (Chen, Zhen); D'Alessandro, R (D'Alessandro, Raffaello); Duranti, M (Duranti, Matteo); Urso, DD (Urso, Domenico D'); Fusco, P (Fusco, Piergiorgio); Gao, JR (Gao, Jiarui); Gao, XH (Gao, Xiaohui); Gargano, F (Gargano, Fabio); Giglietto, N (Giglietto, Nicola); Hu, BL (Hu, Bingliang); Li, R (Li, Ran); Li, Y (Li, Yong); Liu, X (Liu, Xin); Loparco, F (Loparco, Francesco); Lu, JG (Lu, Junguang); Marsella, G (Marsella, Giovanni); Mazziotta, MN (Mazziotta, Mario Nicola); De Mitri, I (De Mitri, Ivan); Mori, N (Mori, Nicola); Orsi, S (Orsi, Silvio); Oscar, A (Oscar, Adriani); Pearce, M (Pearce, Mark); Pohl, M (Pohl, Martin); Ryde, F (Ryde, Felix); Shi, DL (Shi, Dalian); Spillantin, P (Spillantin, Piero); Su, M (Su, Meng); Sun, X (Sun, Xin); Surdo, A (Surdo, Antonio); Walter, R (Walter, Roland); Wang, B (Wang, Bo); Wang, L (Wang, Le); Wang, RJ (Wang, Ruijie); Wang, ZG (Wang, Zhigang); Wu, BB (Wu, Bobing); Wu, X (Wu, Xin); Yan, P (Yan, Peng); Zhang, L (Zhang, Li); Zhang, SN (Zhang, Shuangnan)

Edited by: DenHerder JWA; Takahashi T; Bautz M

Source: SPACE TELESCOPES AND INSTRUMENTATION 2016: ULTRAVIOLET TO GAMMA RAY  Book Series: Proceedings of SPIE  Volume: 9905  Article Number: 99056D  DOI: 10.1117/12.2231804  Part: 1  Published: 2016  

Abstract: The High Energy cosmic-Radiation Detection (HERD) facility is one of several space astronomy payloads of the cosmic light house program onboard China's Space Station, which is planned for operation starting around 2020 for about 10 years. Beam test with a HERD prototype, to verify the HERD specifications and the reading out method of wavelength shifting fiber and image intensified CCD, was taken at CERN SPS in November, 2015. The prototype is composed of an array of 5*5*10 LYSO crystals, which is 1/40th of the scale of HERD calorimeter. Experimental results on the performances of the calorimeter are discussed.

Accession Number: WOS:000387731500178

Conference Title: Conference on Space Telescopes and Instrumentation - Ultraviolet to Gamma Ray

Conference Date: JUN 26-JUL 01, 2016

Conference Location: Edinburgh, SCOTLAND

Conference Sponsors: SPIE

Author Identifiers:

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-5106-0189-5; 978-1-5106-0190-1

Record 18 of 114

Title: Design of a mid-wavelength infrared dual field of view zoom system

Author(s): Duan, J (Duan Jing); Li, G (Li Gang); Jiang, K (Jiang Kai); Liu, K (Liu Kai); Yan, PP (Yan Peipei); Shan, QS (Shan Qiusha)

Edited by: Xu M; Yang J

Source: ADVANCED OPTICAL DESIGN AND MANUFACTURING TECHNOLOGY AND ASTRONOMICAL TELESCOPES AND INSTRUMENTATION  Book Series: Proceedings of SPIE  Volume: 10154  Article Number: UNSP 1015416  DOI: 10.1117/12.2246694  Published: 2016  

Abstract: In order to effectively improve the target detection and recognition ability of IR imagers, based on a 320x256 cooled staring focal plane array(FPA) detector, pixel size 30 mu mx30 mu m, a mid-wavelength infrared dual field of view zoom system was designed. In this paper, the working wavelength is 3 mu m similar to 5 mu m, the temperature range is -40 degrees C similar to+50 degrees C, this system can realize 200mm and 400mm dual focal length, the F-number is 2, the full field of view of short focal length is 3.44 degrees and long focal length is 1.72 degrees respectively, satisfy 100% cold shield efficiency. A re-imaging refractive system was adopted in this designed optical system consists of main optics and projection components. First of all, the structural selection and the initial parameter calculation were introduced in detail. Secondly, on the basis of variety of the distance and temperature, a focusing len was presented in this system to adjust to produce a clear image. Last but not the least, to improve image quality and environment adaptability, the analysis of temperature change and narcissus effect were described particularly. The design results prove that at the spatial frequency of 17 lp/mm, the MTF of the optical system is greater than 0.5(the axis MTF of the optical is greater than 0.6), the system can offer a high resolution and excellent images in whole range of the focal length, and it has the advantages of good adaptability, compact structure, high optical transmission and small size.

Accession Number: WOS:000391500900043

Conference Title: International Symposium on Advanced Optical Design and Manufacturing Technologies / International Symposium on Astronomical Telescope and Instrumentation

Conference Date: MAY 09-11, 2016

Conference Location: Beijing, PEOPLES R CHINA

Conference Sponsors: Chinese Soc Opt Engn, Chinese Soc Astronaut, Photoelectron Technol Comm, China High Tech Industrializat Assoc, Photo Elect Industrializat Comm, China High Tech Industrializat Assoc, Dept Cooperat & Coordinat Ind, Acad & Res

ISSN: 0277-786X

ISBN: 978-1-5106-0767-5

Record 19 of 114

Title: Reflectivity and Depth Images Based on Time-Correlated Single Photon Counting Technique

Author(s): Duan, XJ (Duan, Xuejie); Ma, L (Ma, Lin); Kang, Y (Kang, Yan); Zhang, TY (Zhang, Tongyi)

Edited by: Han S; Tan J

Source: OPTICAL MEASUREMENT TECHNOLOGY AND INSTRUMENTATION  Book Series: Proceedings of SPIE  Volume: 10155  Article Number: UNSP 101552X  DOI: 10.1117/12.2247242  Published: 2016  

Abstract: We presented three-dimensional image including reflectivity and depth image of a target with two traditional optical imaging systems based on time-correlated single photon counting technique (TCSPC), when it was illuminated by a MHz repetition rate pulsed laser source. The first one is bi-static system of which transmitted and received beams path are separated. Another one called mono-static system of which transmit and receive channels are coaxial, so it was also named by transceiver system. Experimental results produced by both systems showed that the mono-static system had more advantages of less noise from ambient light and no limitation about field area of view. While in practical applications, the target was far away leading to there were few photons return which was prejudicial to build 3D images with traditional imaging system. Thus an advanced one named first photon system was presented. This one was also a mono-static system on hardware system structure, but the control system structure was different with traditional transceiver system described in this paper. The difference was that the first return photon per pixel was recorded across system with first photon system, instead of overall return photons per pixel. That's to say only one detected return photon is needed for per pixel of this system to rebuild 3D images of target with less energy and time.

Accession Number: WOS:000391499200106

Conference Title: International Symposium on Optical Measurement Technology and Instrumentation

Conference Date: MAY 09-11, 2016

Conference Location: Beijing, PEOPLES R CHINA

Conference Sponsors: Chinese Soc Opt Engn, Chinese Soc Astronaut, Photo Elect Technol Comm, China High Tech Industrializat Assoc, Photo Elect Industrializat Comm, China High Tech Industrializat Assoc, Dept Cooperat & Coordinat Ind, Acad & Res, SPIE

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-5106-0769-9

Record 20 of 114

Title: Research on manufacturing method of CGH

Author(s): Duan, XT (Duan, Xueting)

Edited by: Zhang Y; Wu F; Xu M; To S

Source: 8TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGY: OPTICAL TEST, MEASUREMENT TECHNOLOGY, AND EQUIPMENT  Book Series: Proceedings of SPIE  Volume: 9684  Article Number: 96841T  DOI: 10.1117/12.2244164  Published: 2016  

Abstract: Computer Generated Holograms (CGH) has shown strong application potential and broad application prospect as the more and more extensive application of CGH. With respect to manufacture an available CGH, design the CGH will be easier. Therefore, this paper mainly summarizes some current feasible CGH manufacturing processes, and in this paper, the manufacturing processes of different types of CGH are presented and analyzed.

Accession Number: WOS:000387429500065

Conference Title: 8th International Symposium on Advanced Optical Manufacturing and Testing Technology (AOMATT) - Optical Test, Measurement Technology, and Equipment

Conference Date: APR 26-29, 2016

Conference Location: Suzhou, PEOPLES R CHINA

Conference Sponsors: Chinese Opt Soc, Chinese Acad Sci, Inst Opt & Elect, SPIE

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-62841-919-1

Record 21 of 114

Title: Non-uniform sampling knife-edge method for camera modulation transfer function measurement

Author(s): Duan, YX (Duan, Yaxuan); Xue, X (Xue, Xun); Chen, YQ (Chen, Yongquan); Tian, LD (Tian, Liude); Zhao, JK (Zhao, Jianke); Gao, LM (Gao, Limin)

Edited by: Han S; Yoshizawa T; Zhang S

Source: OPTICAL METROLOGY AND INSPECTION FOR INDUSTRIAL APPLICATIONS IV  Book Series: Proceedings of SPIE  Volume: 10023  Article Number: 100231C  DOI: 10.1117/12.2245840  Published: 2016  

Abstract: Traditional slanted knife-edge method experiences large errors in the camera modulation transfer function (MTF) due to tilt angle error in the knife-edge resulting in non-uniform sampling of the edge spread function. In order to resolve this problem, a non-uniform sampling knife-edge method for camera MTF measurement is proposed. By applying a simple direct calculation of the Fourier transform of the derivative for the non-uniform sampling data, the camera super-sampled MTF results are obtained. Theoretical simulations for images with and without noise under different tilt angle errors are run using the proposed method. It is demonstrated that the MTF results are insensitive to tilt angle errors. To verify the accuracy of the proposed method, an experimental setup for camera MTF measurement is established. Measurement results show that the proposed method is superior to traditional methods, and improves the universality of the slanted knife-edge method for camera MTF measurement.

Accession Number: WOS:000393153300033

Conference Title: Conference on Optical Metrology and Inspection for Industrial Applications IV held as part of SPIE/COS Photonics Asia Conference

Conference Date: OCT 12-14, 2016

Conference Location: Beijing, PEOPLES R CHINA

Conference Sponsors: SPIE, Chinese Opt Soc

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-5106-0465-0; 978-1-5106-0466-7

Record 22 of 114

Title: Development and Alignment for SiC Mirror Subsystem of a space-borne telescope

Author(s): Feng, LJ (Feng Liang-jie); Wang, W (Wang Wei); Ren, GR (Ren Gruo-rui)

Edited by: Xu M; Yang J

Source: ADVANCED OPTICAL DESIGN AND MANUFACTURING TECHNOLOGY AND ASTRONOMICAL TELESCOPES AND INSTRUMENTATION  Book Series: Proceedings of SPIE  Volume: 10154  Article Number: UNSP 1015425  DOI: 10.1117/12.2247416  Published: 2016  

Abstract: A Phi 600mm SiC primary mirror subsystem of a space-borne Ritchey-Chretien telescope was designed. The open-back primary mirror was made of pressure-less sintering silicon carbide ( SiC), light-weighted at a ratio of approximately 70%. Minimizing the optical surface astigmatism was critical for the mirror, the astigmatism is caused mainly by gravity effects, temperature variation and the bonding process. Three invar flexure bipods were fixed on the baseplate of the telescope at first, and the posture of the primary mirror was adjusted precisely for 0.2mm gap to the bipods. 3M 2216 B/A grey adhesive was then injected into the gap between the mirror and bipod flexure, the curing process was last 72 hours in the room temperature. So the mirror was affected only by curing stress of the adhesive during the assembly process. Structural strength and dynamic stiffness of the mirror subsystem in the thermal-structural coupling state were analyzed with finite element method. Analyzed results show that the optical surface distortion is less than 1/50 lambda at 632.8nm RMS with three points support and less than 1/200 lambda RMS with 2 degrees C temperature variation because of the flexure support and compatible support and mirror material, The optical performance test with interferometer show that the optical surface distortion caused by the curing stress of the adhesive is less than 1/50 lambda RMS, the overall optical surface of the primary mirror is less than 1/30 lambda rms, which met the critical requirements for the primary mirror of the telescope.

Accession Number: WOS:000391500900078

Conference Title: International Symposium on Advanced Optical Design and Manufacturing Technologies / International Symposium on Astronomical Telescope and Instrumentation

Conference Date: MAY 09-11, 2016

Conference Location: Beijing, PEOPLES R CHINA

Conference Sponsors: Chinese Soc Opt Engn, Chinese Soc Astronaut, Photoelectron Technol Comm, China High Tech Industrializat Assoc, Photo Elect Industrializat Comm, China High Tech Industrializat Assoc, Dept Cooperat & Coordinat Ind, Acad & Res

Author Identifiers:

ISSN: 0277-786X

ISBN: 978-1-5106-0767-5

Record 23 of 114

Title: Deep Representation for Abnormal Event Detection in Crowded Scenes

Author(s): Feng, YC (Feng, Yachuang); Yuan, Y (Yuan, Yuan); Lu, XQ (Lu, Xiaoqiang)

Book Group Author(s): ACM

Source: MM'16: PROCEEDINGS OF THE 2016 ACM MULTIMEDIA CONFERENCE  Pages: 591-595  DOI: 10.1145/2964284.2967290  Published: 2016  

Abstract: Abnormal event detection is extremely important, especially for video surveillance. Nowadays, many detectors have been proposed based on hand-crafted features. However, it remains challenging to effectively distinguish abnormal events from normal ones. This paper proposes a deep representation based algorithm which extracts features in an unsupervised fashion. Specially, appearance, texture, and short-term motion features are automatically learned and fused with stacked denoising autoencoders. Subsequently, long-term temporal clues are modeled with a long short-term memory (LSTM) recurrent network, in order to discover meaningful regularities of video events. The abnormal events are identified as samples which disobey these regularities. Moreover, this paper proposes a spatial anomaly detection strategy via manifold ranking, aiming at excluding false alarms. Experiments and comparisons on real world datasets show that the proposed algorithm outperforms state of the arts for the abnormal event detection problem in crowded scenes.

Accession Number: WOS:000387733800056

Conference Title: 24th ACM Multimedia Conference (MM)

Conference Date: OCT 15-19, 2016

Conference Location: Amsterdam, NETHERLANDS

Conference Sponsors: ACM, ACM SIGMM

Author Identifiers:

ISBN: 978-1-4503-3603-1

Record 24 of 114

Title: Dehazing Method for Hyperspectral Remote Sensing Imagery with Hyperspectral Linear Unmixing

Author(s): Gan, YQ (Gan, Yuquan); Hu, BL (Hu, Bingliang); Wen, DS (Wen, Desheng); Wang, S (Wang, Shuang)

Edited by: Liu W; Wang J

Source: HYPERSPECTRAL REMOTE SENSING APPLICATIONS AND ENVIRONMENTAL MONITORING AND SAFETY TESTING TECHNOLOGY  Book Series: Proceedings of SPIE  Volume: 10156  Article Number: UNSP 1015613  DOI: 10.1117/12.2246656  Published: 2016  

Abstract: Haze always exists in hyperspectral remote sensing imagery, and it is a key reason that influences the effective information extraction of hyperspectral images. Specially, when the faint haze covers part of the target in remote sensing images, the target still can be detected but not clear. So, how to remove the influence of the haze and improve the applicable efficiency of hyperspectral images is a popular research point. This paper proposes a dehazing method for hyperspectral images based on linear unmixing. First, a popular hyperspectral unmixing method called FUN is used to get the signature of all the endmembers and their corresponding abundance. And then, the abundance of the haze endmember is removed and the abundances of the rest endmembers are adjusted to satisfy the sum-to-one and non-negative constraint. Lastly, the new abundance and the signature of the endmembers are linearly mixed to get the dehazed hyperspectral images. The experiment result shows that the dehazed hyperspectral images exhibit better target information and details. The method is effective and available.

Accession Number: WOS:000388803200038

Conference Title: International Symposium on Hyperspectral Remote Sensing Applications / International Symposium on Environmental Monitoring and Safety Testing Technology

Conference Date: MAY 09-11, 2016

Conference Location: Beijing, PEOPLES R CHINA

Conference Sponsors: Chinese Soc Opt Engn, China High Tech Industrializat Assoc, Chinese Soc Astronaut, China High Tech Industrializat Assoc, Photo Elect Industrializat Comm, Chinese Soc Astronaut, Photo Elect Technol Comm, China High Tech Industrializat Assoc, Dept Cooperat & Coordinat Ind Acad & Res, SPIE

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-5106-0770-5; 978-1-5106-0771-2

Record 25 of 114

Title: Design and Optimazation of the Shell for One Camera

Author(s): Gao, B (Gao, Bo); Yang, HT (Yang, Hongtao); Shi, K (Shi, Kui); Chen, WN (Chen, Weining)

Edited by: Tsing L; Lee K

Source: PROCEEDINGS OF THE 2015 2ND INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS ENGINEERING, CHEMICAL ENGINEERING AND BIOTECHNOLOGY (MMECEB)  Book Series: AER-Advances in Engineering Research  Volume: 49  Pages: 744-747  Published: 2016  

Abstract: Thestructure of the shell designed for a camerawas investigated. The duralumin named 2A12-T4 was chosen as the main material in order to achievethe minimum weight, and the finite element optimization method wasused for the design of the shell. Introduced the structure characteristics of the shell. Discussed the using of optimization modulenamed Design Exploration in ANSYS workbench. Chosed the thickness of the shell wall and installationpointsas the main optimization parameters. We can see from the perspective of the result of optimization, the weight of shell was reduced from 320g to 255g than the original, reduced about 20% than before. In the same response spectrum, the stress and strain of the optimized structure are affordable and the result is better than before. It can meet the practical requirements.

Accession Number: WOS:000390302000147

Conference Title: 2nd International Conference on Machinery, Materials Engineering, Chemical Engineering and Biotechnology (MMECEB)

Conference Date: NOV 28-29, 2015

Conference Location: Chongqing, PEOPLES R CHINA

Conference Sponsors: Comp Sci & Elect Technol Int Soc, Aljabal Algharby Univ, Azad Univ Quchan, Aichi Prefectural Univ, Natl Inst Technol Rourkela

ISSN: 2352-5401

ISBN: 978-94-6252-151-3

Record 26 of 114

Title: The estimation method on diffusion spot energy concentration of the detection system

Author(s): Gao, W (Gao, Wei); Song, ZX (Song, Zongxi); Liu, F (Liu, Feng); Dan, LJ (Dan, Lijun); Sun, ZH (Sun, Zhonghan); Du, YF (Du, Yunfei)

Edited by: Zhang Y; Wu F; Xu M; To S

Source: 8TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGY: OPTICAL TEST, MEASUREMENT TECHNOLOGY, AND EQUIPMENT  Book Series: Proceedings of SPIE  Volume: 9684  Article Number: 968421  DOI: 10.1117/12.2242811  Published: 2016  

Abstract: We propose a method to estimate the diffusion spot energy of the detection system. We do outdoor observation experiments in Xinglong Observatory, by using a detection system which diffusion spot energy concentration is estimated (the correlation coefficient is approximate 0.9926). The aperture of system is 300mm and limiting magnitude of system is 14.15Mv. Obervation experiments show that the highest detecting magnitude of estimated system is 13.96Mv, and the average detecting magnitude of estimated system is about 13.5Mv. The results indicate that this method can be used to evaluate the energy diffusion spot concentration level of detection system efficiently.

Accession Number: WOS:000387429500073

Conference Title: 8th International Symposium on Advanced Optical Manufacturing and Testing Technology (AOMATT) - Optical Test, Measurement Technology, and Equipment

Conference Date: APR 26-29, 2016

Conference Location: Suzhou, PEOPLES R CHINA

Conference Sponsors: Chinese Opt Soc, Chinese Acad Sci, Inst Opt & Elect, SPIE

Author Identifiers:

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-62841-919-1

Record 27 of 114

Title: Stepless Digital Zoom for High Definition Camera

Author(s): Guo, HN (Guo Huinan); Fang, Y (Fang Yao); Liu, Q (Liu Qing); Zhang, H (Zhang Hui); Ma, N (Ma Nan); Duan, BS (Duan Baosong)

Edited by: Falco CM; Jiang X

Source: EIGHTH INTERNATIONAL CONFERENCE ON DIGITAL IMAGE PROCESSING (ICDIP 2016)  Book Series: Proceedings of SPIE  Volume: 10033  Article Number: UNSP 100334E  DOI: 10.1117/12.2245155  Part: 1  Published: 2016  

Abstract: Real-time full frame view of surveillance camera provides integral visual information of scene. High definition imaging and zooming are widely adopted when observers want to capture more detail information of targets. The optical zooming can provide high zoom ratio detail images of target as well as maintain imaging definition, however, it fails to obtain full view of scene when zoomed, and the field of observation decreases to region of target. Digital zooming is an effective approach to keep the balance between imaging field and visual detail information. This paper presents a method of stepless zooming for digital video camera which could be widely used in autonomous pan, tilt and zoom surveillance system. In view of hardware resources and algorithm realizability, an optimized zooming processing structure is proposed. According to input zoom ratio parameter, it can extract pixels of region of interest adaptively and display with original imaging size by mapping and interpolation algorithms. Experimental results indicate that the stepless zooming method can be capable of achieving 1080p high definition imaging and 30 frame/s video capture.

Accession Number: WOS:000391694700156

Conference Title: 8th International Conference on Digital Image Processing (ICDIP)

Conference Date: MAY 20-23, 2016

Conference Location: Chengdu, PEOPLES R CHINA

Conference Sponsors: Sichuan Province Comp Federat, Int Assoc Comp Sci & Informat Technol, Chengdu Univ Informat Technol, Chinese Acad Sci, Chengdu Inst Compr Applicat

ISSN: 0277-786X

ISBN: 978-1-5106-0503-9; 978-1-5106-0504-6

Record 28 of 114

Title: Radiometric Calibration of Space Remote Sensing Camera

Author(s): Guo, HN (Guo Huinan); Yang, HT (Yang Hongtao); Song, XD (Song Xiaodong); Zhao, RH (Zhao Ronghui); Ma, N (Ma Nan); Wang, W (Wang Wei)

Edited by: Falco CM; Jiang X

Source: EIGHTH INTERNATIONAL CONFERENCE ON DIGITAL IMAGE PROCESSING (ICDIP 2016)  Book Series: Proceedings of SPIE  Volume: 10033  Article Number: UNSP 100333I  DOI: 10.1117/12.2245147  Part: 1  Published: 2016  

Abstract: Radiometric calibration is an important part for space remote sensing camera to obtain an accurate radiation value of ground target. The main significance of radiometric calibration is to reduce the influence by external scene and internal parameters of camera and to recover the real radiation property of objects. In order to break the limitation of line array imaging sensor, we propose a radiometric calibration method based on camera state matrix for area array camera. According to camera response characteristics, calculate and fit a functional relationship between the input radiance energy and the output digital number. Meanwhile, analyse and describe the procedure of radiometric calibration in detail. Experimental results indicates that the calibration method can provide high accuracy linear fitting parameters and can be widely applied to a large variety digital imaging systems.

Accession Number: WOS:000391694700124

Conference Title: 8th International Conference on Digital Image Processing (ICDIP)

Conference Date: MAY 20-23, 2016

Conference Location: Chengdu, PEOPLES R CHINA

Conference Sponsors: Sichuan Province Comp Federat, Int Assoc Comp Sci & Informat Technol, Chengdu Univ Informat Technol, Chinese Acad Sci, Chengdu Inst Compr Applicat

ISSN: 0277-786X

ISBN: 978-1-5106-0503-9; 978-1-5106-0504-6

Record 29 of 114

Title: Real Time H.264 High Definition Videos Encoding based on TMS320DM368 and A Video Quality Evaluation Framework

Author(s): Hao, FS (Hao Fusheng); Huang, JJ (Huang Jijiang); Liu, W (Liu Wei); Wang, YN (Wang Yanan); Yang, HT (Yang Hongtao); Cao, JZ (Cao Jianzhong)

Edited by: Xu B

Source: PROCEEDINGS OF 2016 IEEE ADVANCED INFORMATION MANAGEMENT, COMMUNICATES, ELECTRONIC AND AUTOMATION CONTROL CONFERENCE (IMCEC 2016)  Pages: 128-132  Published: 2016  

Abstract: This pa per presents a framework for evaluating quality of video encoding algorithms. This technique works by collecting source videos, encoding the source videos with a given algorithm, and decoding the compressed sequences. The decoded video shall be measured with the original sources in a specific evaluation method and feedback to the algorithm. Under the guidance of this framework, an implementation based on embedded device is achieved. Firstly, we collect test source videos in two ways: the commonly used standard sequences and actual scenes captured by camera. Secondly, a popular video encoding standard, H.264, is realized on TMS320DM368, a digital media system-on-chip produced by TEXAS INSTRUMENTS (TI). Finally, peak signal-to-noise ratio (PSNR) is implemented and computed among different test sequences. In the experiments, we achieve the real time compression of high definition videos with an acceptable PSNR The video quality framework also can be easily extended to other encoding algorithms.

Accession Number: WOS:000405512400026

Conference Title: IEEE Advanced Information Management, Communicates, Electronic and Automation Control Conference (IMCEC)

Conference Date: OCT 03-05, 2016

Conference Location: Xian, PEOPLES R CHINA

Conference Sponsors: IEEE, IEEE Beijing Sect, Global Union Acad Sci & Technol, Chongqing Global Union Acad Sci & Technol, Xian Peihua Univ

Author Identifiers:

ISBN: 978-1-4673-9613-4

Record 30 of 114

Title: The Turbo Blade Mode in Different Constrains of Blisk

Author(s): He, Y (He, Yun); Feng, S (Feng, Song); Xu, M (Xu, Man); Li, Z (Li, Zhuan)

Edited by: Zeng Z; Bai X

Source: PROCEEDINGS OF THE 2016 2ND WORKSHOP ON ADVANCED RESEARCH AND TECHNOLOGY IN INDUSTRY APPLICATIONS  Book Series: AER-Advances in Engineering Research  Volume: 81  Pages: 881-885  Published: 2016  

Abstract: The blade of the turbo blisk often cracks due to rotor's resonance. The research on influence degree to the turbine blade mode with different constrains of blisk can gain the universal fixture in the modal tests. For this purpose, the vibrant characteristic of blisk was gained by FEM, as well as the modal test of turbine blade was applied in free and intermediate fixed status respectively. The simulation results agreed very well with test ones, which indicated that the influence of blisk constraint can be ignored in modal test when the blisk stiffness is much bigger than the blad.

Accession Number: WOS:000388364600186

Conference Title: 2nd Workshop on Advanced Research and Technology in Industry Applications (WARTIA)

Conference Date: MAY 14-15, 2016

Conference Location: Dalian, PEOPLES R CHINA

ISSN: 2352-5401

ISBN: 978-94-6252-195-7

Record 31 of 114

Title: Improved Artificial Bee Colony Algorithm with Randomized Halton Sequence

Author(s): He, ZA (He, Zhen-An); Ma, CW (Ma, Caiwen)

Book Group Author(s): IEEE

Source: 2016 2ND IEEE INTERNATIONAL CONFERENCE ON COMPUTER AND COMMUNICATIONS (ICCC)  Pages: 1270-1273  Published: 2016  

Abstract: The artificial bee colony (ABC) algorithm has gained popularity for solutions to many real-world complex problems because of its simplicity and efficiency. However, it is good at exploration but poor at exploitation and early gets trapped into local optimum in some case, which prevents the artificial bee colony algorithm from finding the final result accuracy and efficiently for complex problems. It's known to all that population initialization is an important factor affecting convergence performance of ABC. In this paper, a modified artificial bee colony algorithm with randomized Halton sequence was proposed. A series of experiments were performed on benchmark functions to testify the superiority of our proposed algorithm, and results were compared with other initialization algorithms including opposition-based learning, random initialization and chaotic initialization. The results indicate that our proposed algorithm provides higher solution accuracy and faster convergence speed.

Accession Number: WOS:000411576802029

Conference Title: 2nd IEEE International Conference on Computer and Communications (ICCC)

Conference Date: OCT 14-17, 2016

Conference Location: Chengdu, PEOPLES R CHINA

Conference Sponsors: IEEE

ISBN: 978-1-4673-9026-2

Record 32 of 114

Title: High Power Diode Laser Array Development using Completely Indium Free Packaging Technology with Narrow Spectrum

Author(s): Hou, D (Hou, Dong); Wang, JW (Wang, Jingwei); Gao, LJ (Gao, Lijun); Liang, XJ (Liang, Xuejie); Li, XN (Li, Xiaoning); Liu, XS (Liu, Xingsheng)

Edited by: Glebov AL; Leisher PO

Source: COMPONENTS AND PACKAGING FOR LASER SYSTEMS II  Book Series: Proceedings of SPIE  Volume: 9730  Article Number: 973009  DOI: 10.1117/12.2213928  Published: 2016  

Abstract: The high power diode lasers have been widely used in many fields. In this work, a sophisticated high power and high performance horizontal array of diode laser stacks have been developed and fabricated with high duty cycle using hard solder bonding technology. CTE-matched submount and Gold Tin (AuSn) hard solder are used for bonding the diode laser bar to achieve the performances of anti-thermal fatigue, higher reliability and longer lifetime. This array consists of 30 bars with the expected optical output peak power of 6000W. By means of numerical simulation and analytical results, the diode laser bars are aligned on suitable positions along the water cooled cooler in order to achieve the uniform wavelength with narrow spectrum and accurate central wavelength. The performance of the horizontal array, such as outputpower, spectrum, thermal resistance, life time, etc., is characterized and analyzed.

Accession Number: WOS:000381727500005

Conference Title: Conference on Components and Packaging for Laser Systems II

Conference Date: FEB 16-18, 2016

Conference Location: San Francisco, CA

Conference Sponsors: SPIE

Author Identifiers:

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-62841-965-8

Record 33 of 114

Title: Temporal Multimodal Learning in Audiovisual Speech Recognition

Author(s): Hu, D (Hu, Di); Li, XL (Li, Xuelong); Lu, XQ (Lu, Xiaoqiang)

Book Group Author(s): IEEE

Source: 2016 IEEE CONFERENCE ON COMPUTER VISION AND PATTERN RECOGNITION (CVPR)  Book Series: IEEE Conference on Computer Vision and Pattern Recognition  Pages: 3574-3582  DOI: 10.1109/CVPR.2016.389  Published: 2016  

Abstract: In view of the advantages of deep networks in producing useful representation, the generated features of different modality data (such as image, audio) can be jointly learned using Multimodal Restricted Boltzmann Machines (MRBM). Recently, audiovisual speech recognition based the MRBM has attracted much attention, and the MRBM shows its effectiveness in learning the joint representation across audiovisual modalities. However, the built networks have weakness in modeling the multimodal sequence which is the natural property of speech signal. In this paper, we will introduce a novel temporal multimodal deep learning architecture, named as Recurrent Temporal Multimodal RBM (RTMRBM), that models multimodal sequences by transforming the sequence of connected MRBMs into a probabilistic series model. Compared with existing multimodal networks, it's simple and efficient in learning temporal joint representation. We evaluate our model on audiovisual speech datasets, two public (AVLetters and AVLetters2) and one self-build. The experimental results demonstrate that our approach can obviously improve the accuracy of recognition compared with standard MRBM and the temporal model based on conditional RBM. In addition, RTMRBM still outperforms non-temporal multimodal deep networks in the presence of the weakness of long-term dependencies.

Accession Number: WOS:000400012303069

Conference Title: 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR)

Conference Date: JUN 27-30, 2016

Conference Location: Seattle, WA

Conference Sponsors: IEEE Comp Soc, Comp Vis Fdn

Author Identifiers:

ISSN: 1063-6919

ISBN: 978-1-4673-8851-1

Record 34 of 114

Title: Optimization Design about Gimbal Structure of High-Precision Autonomous Celestial Navigation Tracking Mirror System

Author(s): Huang, W (Huang Wei); Yang, XX (Yang Xiao-xu); Han, JF (Han Jun-feng); Wei, Y (Wei Yu); Zhang, J (Zhang Jing); Xie, ML (Xie Mei-lin); Yue, P (Yue Peng)

Edited by: Lv Y; Bao W

Source: SELECTED PAPERS OF THE PHOTOELECTRONIC TECHNOLOGY COMMITTEE CONFERENCES HELD NOVEMBER 2015  Book Series: Proceedings of SPIE  Volume: 9796  Article Number: 97961S  DOI: 10.1117/12.2229022  Published: 2016  

Abstract: High precision tracking platform of celestial navigation withcontrol mirror servo structure form, to solve the disadvantages of big volume and rotational inertia, slow response speed, and so on. It improved the stability and tracking accuracy of platform. Due to optical sensor and mirror are installed on the middle -gimbal, stiffness and resonant frequency requirement for high. Based on the application of finite element modality analysis theory, doing Research on dynamic characteristics of the middle -gimbal, and ANSYS was used for the finite element dynamic emulator analysis. According to the result of the computer to find out the weak links of the structure, and Put forward improvement suggestions and reanalysis. The lowest resonant frequency of optimization middle -gimbal avoid the bandwidth of the platform servo mechanism, and much higher than the disturbance frequency of carrier aircraft, and reduces mechanical resonance of the framework. Reaching provides a theoretical basis for the whole machine structure optimization design of high -precision of autonomous Celestial navigation tracking mirror system.

Accession Number: WOS:000374450700064

Conference Title: Photoelectronic-Technology-Committee Conference

Conference Date: NOV 15-28, 2015

Conference Location: PEOPLES R CHINA

Conference Sponsors: Photoelectron Technol Comm

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-62841-881-1

Record 35 of 114

Title: The effect analysis of conic coefficient error based on data measured from Talysurf and simulation of Zernike coefficients

Author(s): Jiang, K (Jiang, Kai); Liu, K (Liu, Kai); Song, C (Song, Chong); Qiu, P (Qiu, Peng); Wang, P (Wang, Peng); Li, G (Li, Gang)

Edited by: Zhang Y; Wu F; Xu M; To S

Source: 8TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGY: OPTICAL TEST, MEASUREMENT TECHNOLOGY, AND EQUIPMENT  Book Series: Proceedings of SPIE  Volume: 9684  Article Number: 96843C  DOI: 10.1117/12.2242968  Published: 2016  

Abstract: Derivation of the conic coefficient error of practical aspheric optic surface is quite significant to aspheric machining accuracy, optical system imaging quality analysis and decomposition analysis of optical lenses. The primary mirror of R-c telescope system was tested by Taylor Hobson Talysurf. The practical surface was fitted using Zernike polynomials based on the date measured from Talysurf. Though taking the Zernike coefficients into the optical system, the effect of the aberration which was brought by optical machining to the optical system imaging quality was obtained. The analysis shows that the spherical aberration was brought into the optical system because of the figure error of the primary mirror. And the value of the spherical aberration was same to the practical alignment result. Then the conicoid aspherical degree of the primary mirror was tested by the Talysurf. The machining deviation of the conic coefficient was gotten though comparing the conicoid aspherical degree of the practical primary mirror with that of the perfect primary mirror. The practical conic coefficient was calculated by the deviation. Taking the practical conic coefficient into the R-c telescope system, the degradation of the optical system imaging quality was known. Also the spherical aberration was brought into the optical system. Experimental results show that the value of the spherical aberration analyzed by the two methods is same and consist with the practical alignment result. That is to say that the conic coefficient changed due to machining error of the conicoid aspherical degree. Because of the change the spherical aberration was attached to primary mirror. And which caused the optical system imaging quality declined. Finally, corrector was designed to balance the spherical aberration of the primary mirror. Ensure that the optical system imaging quality meet the requirement.

Accession Number: WOS:000387429500120

Conference Title: 8th International Symposium on Advanced Optical Manufacturing and Testing Technology (AOMATT) - Optical Test, Measurement Technology, and Equipment

Conference Date: APR 26-29, 2016

Conference Location: Suzhou, PEOPLES R CHINA

Conference Sponsors: Chinese Opt Soc, Chinese Acad Sci, Inst Opt & Elect, SPIE

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-62841-919-1

Record 36 of 114

Title: Resolution allocation and budget of the Lyman-α ultraviolet telescope

Author(s): Jiang, K (Jiang Kai); Jiang, B (Jiang Bo); Liu, K (Liu Kai); Yan, PP (Yan Peipei); Duan, J (Duan Jing); Shan, QS (Shan Qiusha)

Edited by: Xu M; Yang J

Source: ADVANCED OPTICAL DESIGN AND MANUFACTURING TECHNOLOGY AND ASTRONOMICAL TELESCOPES AND INSTRUMENTATION  Book Series: Proceedings of SPIE  Volume: 10154  Article Number: UNSP 101541C  DOI: 10.1117/12.2246786  Published: 2016  

Abstract: As a high-resolution imaging instrument, angular resolution is the most important index of Lyman-a ultraviolet telescope. In this paper a new allocation and budget method is introduced. An resolution error allocation of surface roughness. figure error and alignment error was developed early in the program. And the allocation was used to guide the design. Though testing the surface roughness and figure error in visible light, the variation of diffraction encircled energy can be obtained by non-sequence model and Zernike coefficients brought into optical design software. The numerical results show that the effective RMS surface roughness of primary and secondary mirrors are 0.49nm and 0.40nm in the spatial frequency from 1/D (D is the diameter of the mirror) to 1/lambda (lambda is an incident wavelength). And the effects of the surface roughness are both less than 0.1 ''. The figure error of the primary and secondary mirrors are 0.009. and 0.007. (lambda=632.8nm). The resolution errors which were brought by the figure error are 0.33 '' and 0.16 ''. Then the effect of alignment error on angular resolution was gotten by testing visual resolution. Finally the angular resolution in ultraviolet band can be calculated. The focal length of Lyman-alpha ultraviolet telescope is 2000mm and the pixel size of detector is 14 mu m. So the pixel resolution is 1.4 ''. Experimental results show that the angular resolution of Lyman-alpha ultraviolet telescope is 0.59 '', which is approached to the estimate and meet the requirement.

Accession Number: WOS:000391500900049

Conference Title: International Symposium on Advanced Optical Design and Manufacturing Technologies / International Symposium on Astronomical Telescope and Instrumentation

Conference Date: MAY 09-11, 2016

Conference Location: Beijing, PEOPLES R CHINA

Conference Sponsors: Chinese Soc Opt Engn, Chinese Soc Astronaut, Photoelectron Technol Comm, China High Tech Industrializat Assoc, Photo Elect Industrializat Comm, China High Tech Industrializat Assoc, Dept Cooperat & Coordinat Ind, Acad & Res

ISSN: 0277-786X

ISBN: 978-1-5106-0767-5

Record 37 of 114

Title: Demonstration of Bi-and Multi-Stability in a High Order Ring Resonator

Author(s): Jin, L (Jin, Li); Pasquazi, A (Pasquazi, Alessia); Di Lauro, L (Di Lauro, Luigi); Peccianti, M (Peccianti, Marco); Pun, EYB (Pun, Edwin Y. B.); Moss, DJ (Moss, David J.); Morandotti, R (Morandotti, Roberto); Little, BE (Little, Brent E.); Chu, ST (Chu, Sai T.)

Book Group Author(s): IEEE

Source: 2016 21ST OPTOELECTRONICS AND COMMUNICATIONS CONFERENCE (OECC) HELD JOINTLY WITH 2016 INTERNATIONAL CONFERENCE ON PHOTONICS IN SWITCHING (PS)  Published: 2016  

Abstract: We experimentally demonstrated the bistability and multi-stability in a 5th order cascaded CMOS compatible ring resonator. The shape evolution of the filter under different states is also investigated.

Accession Number: WOS:000392308800137

Conference Title: 21st OptoElectronics and Communications Conference (OECC) / International Conference on Photonics in Switching (PS)

Conference Date: JUL 03-07, 2016

Conference Location: Niigata, JAPAN

Author Identifiers:

Record 38 of 114

Title: Four Mode Multi-correlated Bi-Photon States within an Integrated Quantum Frequency Comb

Author(s): Kues, M (Kues, Michael); Reimer, C (Reimer, Christian); Wetzel, B (Wetzel, Benjamin); Rortocki, P (Rortocki, Piotr); Caspani, L (Caspani, Lucia); Bromberg, Y (Bromberg, Yaron); Little, BE (Little, Brent E.); Munro, WJ (Munro, William J.); Chu, ST (Chu, Sai T.); Moss, DJ (Moss, David J.); Morandotti, R (Morandotti, Roberto)

Book Group Author(s): IEEE

Source: 2016 CONFERENCE ON LASERS AND ELECTRO-OPTICS (CLEO)  Book Series: Conference on Lasers and Electro-Optics  Published: 2016  

Abstract: The generation of two-photon multi-correlated states over four modes and their pairwise entanglement is demonstrated by superimposing two different spontaneous four-wave mixing processes inside a bi-modally pumped CMOS-compatible microring resonator.

Accession Number: WOS:000391286400245

Conference Title: Conference on Lasers and Electro-Optics (CLEO)

Conference Date: JUN 05-10, 2016

Conference Location: San Jose, CA

Author Identifiers:

ISSN: 2160-9020

ISBN: 978-1-9435-8011-8

Record 39 of 114

Title: Design and Research of Moving Objects Dimension Measurement System Based on Linear Array CCD

Author(s): Lei, FP (Lei, Fanpu); Bai, YL (Bai, Yonglin); Zhu, BL (Zhu, Bingli)

Edited by: Xu M; Yang J

Source: ADVANCED OPTICAL DESIGN AND MANUFACTURING TECHNOLOGY AND ASTRONOMICAL TELESCOPES AND INSTRUMENTATION  Book Series: Proceedings of SPIE  Volume: 10154  Article Number: UNSP 101540R  DOI: 10.1117/12.2246493  Published: 2016  

Abstract: A novel moving objects dimension measurement system based on the linear array CCD is designed. The light source is a pulsed laser with pulse width 200ns. Single point of light passes through lens converted to parallel light which will illuminate to the CCD through the moving object to be tested. CCD pixels which are blocked by the object while light is on are low, and the remaining pixels are high conversely. The distance of the tested objects while light is on can be ignored since the light pulse width is much smaller than the integration time of CCD (10ms generally). The size of the tested object can be achieved by the number of dark pixels of CCD while light is on. This paper introduces the principle and composition of the dimension measurement system. The results show that this system can measure the size of moving objects and measuring accuracy is better than 50 microns. Accuracy and stability of the system can achieve actual production requirements when the object's moving speed is smaller than 50mm/s. Optimizing the parallelism of the parallel light, the measurement accuracy can be further improved.

Accession Number: WOS:000391500900028

Conference Title: International Symposium on Advanced Optical Design and Manufacturing Technologies / International Symposium on Astronomical Telescope and Instrumentation

Conference Date: MAY 09-11, 2016

Conference Location: Beijing, PEOPLES R CHINA

Conference Sponsors: Chinese Soc Opt Engn, Chinese Soc Astronaut, Photoelectron Technol Comm, China High Tech Industrializat Assoc, Photo Elect Industrializat Comm, China High Tech Industrializat Assoc, Dept Cooperat & Coordinat Ind, Acad & Res

Author Identifiers:

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-5106-0767-5

Record 40 of 114

Title: Comparative Analysis on PMSM Control System Based on SPWM and SVPWM

Author(s): Li, B (Li, Bo); Wang, C (Wang, Chen)

Book Group Author(s): IEEE

Source: PROCEEDINGS OF THE 28TH CHINESE CONTROL AND DECISION CONFERENCE (2016 CCDC)  Book Series: Chinese Control and Decision Conference  Pages: 5071-5075  Published: 2016  

Abstract: This paper firstly introduces the principles of SPWM (space vector pulse width modulation) and SVPWM (sinusoidal pulse width modulation), and then builds PMSM (permanent magnet synchronous motor) control system simulation models based on SPWM and SVPWM in MATLAB/Simulink environment. Finally, by comparing the simulation results of the two models, we got the advantages and disadvantages of SPWM and SVPWM.

Accession Number: WOS:000383222305060

Conference Title: 28th Chinese Control and Decision Conference

Conference Date: MAY 28-30, 2016

Conference Location: Yinchuan, PEOPLES R CHINA

Conference Sponsors: NE Univ, State Key Lab Synthet Automat Proc Ind, IEEE Ind Elect Chapter, Beifang Univ Nationalities, IEEE Control Syst Soc, Syst Engn Soc China, Chinese Assoc Artificial Intelligence, Chinese Assoc Artificial Intelligence, Tech Comm Control Theory

Author Identifiers:

ISSN: 1948-9439

ISBN: 978-1-4673-9714-8

Record 41 of 114

Title: A Design of Driving circuit for Star Sensor Imaging Camera

Author(s): Li, DW (Li Da-wei); Yang, XX (Yang Xiao-xu); Han, JF (Han Jun-feng); Liu, ZH (Liu Zhao-hui)

Edited by: Lv Y; Bao W

Source: SELECTED PAPERS OF THE PHOTOELECTRONIC TECHNOLOGY COMMITTEE CONFERENCES HELD NOVEMBER 2015  Book Series: Proceedings of SPIE  Volume: 9796  Article Number: 97961Q  DOI: 10.1117/12.2228887  Published: 2016  

Abstract: The star sensor is a high-precision attitude sensitive measuring instruments, which determine spacecraft attitude by detecting different positions on the celestial sphere. Imaging camera is an important portion of star sensor. The purpose of this study is to design a driving circuit based on Kodak CCD sensor. The design of driving circuit based on Kodak KAI-04022 is discussed, and the timing of this CCD sensor is analyzed. By the driving circuit testing laboratory and imaging experiments, it is found that the driving circuits can meet the requirements of Kodak CCD sensor.

Accession Number: WOS:000374450700062

Conference Title: Photoelectronic-Technology-Committee Conference

Conference Date: NOV 15-28, 2015

Conference Location: PEOPLES R CHINA

Conference Sponsors: Photoelectron Technol Comm

Author Identifiers:

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-62841-881-1

Record 42 of 114

Title: Study on Fuzzy Self-adaptive PID for Galvanometer Control System

Author(s): Li, SN (Li, Shengnan); Cao, JZ (Cao, Jianzhong); Zhou, ZF (Zhou, Zuofeng)

Edited by: Jiang ZY

Source: PROCEEDINGS OF THE 2015 6TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND ENGINEERING  Book Series: AER-Advances in Engineering Research  Volume: 32  Pages: 358-363  Published: 2016  

Abstract: A new method based on fuzzy self-adaptive PID for the galvanometer control system is presented. This method overcomes some defects of the traditional PID control, such as lower control precision and worse anti-jamming performance. At first, this paper analyzed the theory of galvanometer control system and established the mathematical model of the moving magnetic galvanometer motor. Then, the paper presented the design method of fuzzy self-adaptive PID controller in detail and using the simulation software to realize the system design. At last, the simulation results of PID control were compared with those of the Fuzzy-PID control method. The results show that the Fuzzy-PID control method has better dynamic and static performance, as well as anti-jamming performance.

Accession Number: WOS:000388457800067

Conference Title: 6th International Conference on Manufacturing Science and Engineering (ICMSE)

Conference Date: NOV 28-29, 2015

Conference Location: Guangzhou, PEOPLES R CHINA

ISSN: 2352-5401

ISBN: 978-94-6252-137-7

Record 43 of 114

Title: Packaging of Hard Solder 500W QCW Diode Laser Array

Author(s): Li, XN (Li, Xiaoning); Wang, JW (Wang, Jingwei); Hou, D (Hou, Dong); Nie, ZQ (Nie, Zhiqiang); Liu, XS (Liu, Xingsheng)

Edited by: Glebov AL; Leisher PO

Source: COMPONENTS AND PACKAGING FOR LASER SYSTEMS II  Book Series: Proceedings of SPIE  Volume: 9730  Article Number: 97300D  DOI: 10.1117/12.2213977  Published: 2016  

Abstract: The package structure critically influences the major characteristics of diode laser, such as thermal behavior, output power, wavelength and smile effect. In this work, a novel micro channel cooler (MCC) for stack array laser with good heat dissipation capability and high reliability is presented. Numerical simulations of thermal management with different MCC structure are conducted and analyzed. Based on this new MCC packaging structure, a series of QCW 500W high power laser arrays with hard solder packaging technology has been fabricated. The performances of the laser arrays are characterized. A narrow spectrum of 3.12 nm and an excellent smile value are obtained. The lifetime of the laser array is more than 1.38x10(9) shots and still ongoing.

Accession Number: WOS:000381727500009

Conference Title: Conference on Components and Packaging for Laser Systems II

Conference Date: FEB 16-18, 2016

Conference Location: San Francisco, CA

Conference Sponsors: SPIE

Author Identifiers:

ISSN: 0277-786X

eISSN: 1996-756X

ISBN: 978-1-62841-965-8

Record 44 of 114

Title: Measurement of excited layer thickness in highly photo-excited GaAs

Author(s): Liang, LL (Liang, Lingliang); Tian, JS (Tian, Jinshou); Wang, T (Wang, Tao); Wu, SL (Wu, Shengli); Li, FL (Li, Fuli); Gao, GL (Gao, Guilong)

Edited by: Han S; Tan J

Source: OPTICAL MEASUREMENT TECHNOLOGY AND INSTRUMENTATION  Book Series: Proceedings of SPIE  Volume: 10155  Article Number: UNSP 101551Q  DOI: 10.1117/12.2246652  Published: 2016  

Abstract: Highly photo-excited layer thickness in GaAs is measured using a pump probe arrangement. A normally incident pump illumination spatially modulated by a mask will induce a corresponding refractive index change distribution in the depth direction due to edge scattering and attenuation absorption effect, which can deflect the probe beam passing through this excited region. Maximum deflection of the probe beam will be limited by the thickness of excited layer, and thus can also be employed to measure the thickness of the photo-excited layer of the material. Theoretical calculation confirms the experimental results. This method can find its application in measurements of photo-excited layer thickness of many kinds of materials and be significant to study the characteristics of materials in laser machining, grating and waveguide fabricating.

Accession Number: WOS:000391499200063

Conference Title: International Symposium on Optical Measurement Technology and Instrumentation

Conference Date: MAY 09-11, 2016

Conference Location: Beijing, PEOPLES R CHINA

Conference Sponsors: Chinese Soc Opt Engn, Chinese Soc Astronaut, Photo Elect Technol Comm, China High Tech Industrializat Assoc, Photo Elect Industrializat Comm, China High Tech Industrializat Assoc, Dept Cooperat & Coordinat Ind, Acad & Res, SPIE

Author Identifiers:

ISSN: 0277-786X

ISBN: 978-1-5106-0769-9

Record 45 of 114

Title: Mode-Order-Invariant Beam Splitter on Silicon-on-Insulator Waveguide

Author(s): Liao, JW (Liao, Jianwen); Wang, GX (Wang, Guoxi); Zhang, WF (Zhang, Wenfu)

Book Group Author(s): IEEE

Source: 2016 IEEE 13TH INTERNATIONAL CONFERENCE ON GROUP IV PHOTONICS (GFP)  Book Series: IEEE International Conference on Group IV Photonics  Pages: 143-144  Published: 2016  

Abstract: We present a mode splitter whirls is able to split the TE0&TE1 modes without changing the mode order. High coupling efficiency (>-2 dB), low insertion loss (<-0.1 dB) and good fabrication tolerance (-40 nm <Delta w < 70 nm) can be obtained over a wide bandwidth of 150 nm.

Accession Number: WOS:000388734100068

Conference Title: IEEE 13th International Conference on Group IV Photonics (GFP)

Conference Date: AUG 24-26, 2016

Conference Location: Shanghai, PEOPLES R CHINA

Conference Sponsors: IEEE, Intel, Luceda Photon, Lumerical Solut Inc, Synopsys Inc