2025

• Record 49 of
  
  Title:Effect of crack template structure morphology on electromagnetic shielding efficiency and visual performance of metal mesh optical window
  
  Author Full Names:Yang, Liqing(1); Guan, Yongmao(1,2); Gao, Fei(1); Wan, Rui(1); Wang, Pengfei(1)

  Source Title:Results in Engineering

  Language:English

  Document Type:Journal article (JA)

  Abstract:Electromagnetic shielding optical windows are crucial for protecting photoelectric detection and imaging systems. The template used in metal mesh fabrication significantly affects the electromagnetic shielding and visual performance of these windows. This study explores the preparation of crack templates with varying structural parameters by adjusting the precursor solution. Four different acrylic resin colloids were prepared using water, ethylene glycol, glycerol, and N-methylpyrrolidone (NMP), leading to the creation of four mask templates (DP1–DP4). The morphology and structural characteristics of the templates were analyzed using optical and laser confocal microscopy. DP1, made with water, exhibited the highest edge warping (1.5 µm), whereas DP4, using ethylene glycol and glycerol, showed the least warping (0.3 µm). Infrared spectroscopy revealed that hydrogen bonding in the solvents influenced crack formation, resulting in narrower cracks and smaller periods. Copper meshes were deposited using these templates, with DP1- and DP4-mesh showing average transmittances of 80.2 % and 84.5 %, respectively, across 380–800 nm. Electromagnetic shielding efficiency exceeded 15 dB between 1 and 18 GHz, with DP1-mesh reaching 29 dB at 1 GHz. However, DP1-mesh's larger lines reduced light transmittance, likely due to increased edge warping enhancing line connectivity and reducing breakage. © 2025 The Authors

  Affiliations:(1) State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences (CAS), Xi'an; 710119, China; (2) Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing; 100049, China

  Publication Year:2025

  Volume:25

  Article Number:103888

  DOI Link:10.1016/j.rineng.2024.103888

  数据库ID（收录号）:20250317708234
• Record 50 of
  
  Title:X-ray communication system with high-repetition-rate pulsed X-ray source and LYSO(Ce) and YAP(Ce) scintillators
  
  Author Full Names:Li, Yun(1,2); Su, Tong(1); Sheng, Lizhi(1); Zhang, Ruili(1); Chen, Junfeng(3); Wang, Bo(1); Qiang, Pengfei(1)

  Source Title:Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment

  Language:English

  Document Type:Journal article (JA)

  Abstract:X-ray communication offers significant advantages over traditional microwave methods due to its shorter wavelength and higher theoretical bandwidth, enabling efficient space communication and penetration through complex electromagnetic environments. However, current systems face limitations in X-ray emission modulation and high-precision timing detection. To meet the high-frequency transmission demands of space missions, we developed a pulsed X-ray emission source capable of high-frequency modulation. Additionally, we identified specific scintillators with distinct advantages for different transmission frequency ranges, allowing for performance optimization. Experimental results demonstrated a successful transmission rate of 10 MHz, validating the feasibility of MHz-frequency X-ray communication. © 2024

  Affiliations:(1) State Key Laboratory of Transients Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China; (3) Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai; 201899, China

  Publication Year:2025

  Volume:1070

  Article Number:170022

  DOI Link:10.1016/j.nima.2024.170022

  数据库ID（收录号）:20244617348898
• Record 51 of
  
  Title:Fluorescence temperature dependent behaviors of Eu3+/Mn4+ co-doping cubic and hexagonal ZnO-TiO2 compounds: Application in high sensitive optical thermometers
  
  Author Full Names:Sun, Chengmei(1); Xu, Chengcheng(1); Ren, Wenzhen(2); Hu, Fengya(1); Yuan, Jun(1); Wang, Qingru(1); Xie, Yanru(1); Wang, Kai(1); Zhang, Dong(1)

  Source Title:Journal of Alloys and Compounds

  Language:English

  Document Type:Journal article (JA)

  Abstract:ZnTiO3:Eu3+,Mn4+ phosphors with hexagonal and cubic structure are synthesized by solvothermal method. The structure of ZnTiO3 depends on precursors and the annealing temperature. Inverse spinel Zn2TiO4 phase reveals the highest thermostability compared with cubic ZnTiO3 and hexagonal ZnTiO3 phases. The different phases of ZnTiO3 crystals exhibit different photoluminescence properties. The forbidden transition of 4A2g→2T2g for Mn4+ is observed in Zn2TiO4 and hexagonal ZnTiO3 (h-ZnTiO3) due to the decreased symmetry. The zero photon line (ZPL) assigned to 2Eg→4A2g transition of Mn4+ is absent in all type ZnTiO3 phases. A sharp emission peak at 714 nm assigned to ν6 (Stokes emission) mode of Mn4+ in h-ZnTiO3 is present when the temperature was below 270 K, and increases sharply in intensity with the temperature decreasing. The similar PL spectra of cubic ZnTiO3 and Zn2TiO4 co-doped with Eu3+ and Mn4+ show a wide emission band composed of Stokes and anti-Stokes modes. The calculated nephelauxetic parameter increases from 0.84 to 1.03 and 1.18 for Mn4+ in h-ZnTiO3, cubic ZnTiO3 and Zn2TiO4, respectively, indicating the covalency decreasing, which causes the red shift of ZPL in h-ZnTiO3. The Mn4+ emissions show stronger temperature dependence than that of Eu3+, especially for that in h-ZnTiO3 matrix. Based on the fluorescence intensity ratio between IEu3+ and IMn4+, the highest relative temperature sensitivity of 2.46 %K−1 is observed in cubic ZnTiO3 (c-ZnTiO3) and Zn2TiO4. Under the excitation at 550 nm, the highest relative sensitivity of 2.9 %K−1 is achieved in c- and h-ZnTiO3 mixed phases. © 2024 Elsevier B.V.

  Affiliations:(1) School of Physical Science and Information Technology, Shandong Key Lab. of Optical Communication Science and Technology, Liaocheng University, Liaocheng; 252059, China; (2) State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China

  Publication Year:2025

  Volume:1010

  Article Number:177374

  DOI Link:10.1016/j.jallcom.2024.177374

  数据库ID（收录号）:20244617354185
• Record 52 of
  
  Title:Infrared microlens formation on chalcogenide polymer surface via femtosecond laser pulse ablation
  
  Author Full Names:Liu, Feng(1); Li, Xianda(2); Yu, Longyuan(1); Zhang, Xiaomo(2); Li, Peng(1); Liu, Sheng(1); Zhang, Jiwei(1); Gan, Xuetao(1); Li, Weinan(2); Wang, Pengfei(2); Zhu, Xiangping(2); Zhao, Jianlin(1)

  Source Title:Optics and Laser Technology

  Language:English

  Document Type:Journal article (JA)

  Abstract:In this study, we introduced micro-optical surface formation via femtosecond (fs) laser pulse scanning to chalcogenide polymer (ChP), a promising material for cost-effective infrared applications. Employing this method, we successfully fabricated a large-area poly(sulfur-random-(1,3-diisopropenylbenzene)) (S-r-DIB) microlens array (MLA) component. Each micro-concave spherical surface was crafted with a single fs laser pulse, serving as a micro-concave lens surface. We achieved a quasi-periodic MLA sample with over 2 × 105 micro-lenslets within a 10 mm × 10 mm footprint. Additionally, precise locating of laser pulse irradiation enabled us to create a hexagonal MLA with a filling factor over 37 %. Morphological investigations and imaging tests confirmed the adequate surface quality of the fabricated components, with its uniformity revealed by the virtual foci grid in near infrared region. To elucidate the forming conditions and mechanisms, we studied the evolution of surface morphology under various laser irradiation conditions. Laser induced damage thresholds of S70-r-DIB30 were experimentally determined for both 800 nm and 400 nm wavelengths under single- and multi-pulse irradiation scenarios. We identified the optimal fabrication fluence window as 115–205 mJ/cm2 with 800 nm single-pulse irradiation. The bandgap of the S70-r-DIB30 was estimated as 2.06 eV, and energy band analysis confirmed distinctions in ablation morphology. Furthermore, we investigated sub-surface morphology evolution using orthogonal ultrafast pump–probe imaging, revealing diversity compared to traditional inorganic and polymeric optical materials due to differing absorption and etching mechanisms. The elastic wave velocity of 3.2 km/s in this ChP and etching velocity of 0.7 μm/pulse were experimentally determined. These findings deepen our understanding of ChP material interaction with fs lasers, offering insights for potential applications such as surface engineering, substrate cutting, and micro-structure formation. © 2024

  Affiliations:(1) Key Laboratory of Light Field Manipulation and Information Acquisition, Ministry of Industry and Information Technology, Shaanxi Key Laboratory of Optical Information Technology, Shaanxi Basic Discipline (Liquid Physics) Research Center, School of Physical Science and Technology, Northwestern Polytechnical University, Xi'an; 710129, China; (2) State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China

  Publication Year:2025

  Volume:181

  Article Number:111679

  DOI Link:10.1016/j.optlastec.2024.111679

  数据库ID（收录号）:20243516936355
• Record 53 of
  
  Title:150 MHz, All-Polarization-Maintaining Fiber Integrated Figure-9 Femtosecond Laser
  
  Author Full Names:Cheng, Haihao(1,2); Zhang, Zhao(1,2); Hu, Xiaohong(1,2); Zhang, Ting(1,2); Pan, Ran(1,2); Jia, Jing(1,2); Wang, Yishan(1,2); Wu, Shun(3)

  Source Title:IEEE Photonics Technology Letters

  Language:English

  Document Type:Journal article (JA)

  Abstract:We accomplish a compact 150-MHz figure-9 Er: fiber laser through the use of a hybrid device of wavelength division multiplexer and phase shifter. By combining the time-independent rate equation and nonlinear Schrödinger equation, evolution of the intracavity field towards stable mode locking state is presented. We further quantify the output characteristics of the 150-MHz figure-9 laser. Explicitly, 5.8-mW average power, center wavelength of 1561.2 nm and 3-dB spectral bandwidth of 29.2 nm are obtained. More importantly, an integrated root-mean-square relative intensity noise of 0.0016% [1 Hz, 1 MHz] and 75.8 fs timing jitter [100 Hz, 1 MHz] are measured at the fundamental repetition rate. Moreover, by referencing to a stable radio frequency, the fundamental repetition rate is locked with an in-loop relative instability of 2.78× 10-12 at 1-s gate time. © 1989-2012 IEEE.

  Affiliations:(1) Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, State Key Laboratory of Transient Optics and Photonics, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China; (3) Wuhan Institute of Technology, Hubei Key Laboratory of Optical Information and Pattern Recognition, Wuhan; 430205, China

  Publication Year:2025

  Volume:37

  Issue:3

  Start Page:165-168

  DOI Link:10.1109/LPT.2024.3523958

  数据库ID（收录号）:20250417759813
• Record 54 of
  
  Title:Bulk damage growth characteristics and ultrafast diagnosis of fluoride-containing phosphate glasses induced by 355-nm laser
  
  Author Full Names:Li, Shengwu(1,2); Jiang, Yong(3,4); Wan, Rui(1); Wang, Pengfei(1)

  Source Title:Optics and Laser Technology

  Language:English

  Document Type:Journal article (JA)

  Abstract:To comprehensively reveal the influence regularity of different glass melting temperatures on the ultraviolet (UV) laser-induced damage resistance of fluoride-containing phosphate glasses, the initial bulk damage, damaged growth, and dynamic behaviors of both fundamental-frequency (1ω) absorptive and third-harmonic-frequency (3ω) transparent fluoride-containing phosphate glasses are explored utilizing the time-resolved pump–probe shadowgraph technique. A low-temperature (1000 °C) glass melting process resulted in an increase in the absorption coefficient at 355 nm and decrease in the optical bandgap for the 1ω absorptive glass. The produced 1ω absorptive glass was subjected to higher shock pressure and shock temperature on the rear surface after a single-pulse laser irradiation, and had a more serious filamentation damage accompanied by a funnel-shape morphology. With the subsequent multiples irradiation, the initial bulk damage area increased exponentially with a growth coefficient of 0.72. The corresponding exponential growth coefficient for the counterpart 1ω absorptive glass melted at a high temperature (1200 °C) was only 0.32 due to its slight initial bulk damage. In contrast, for the 3ω transparent glass, the high-temperature (1200 °C) melting process led to a larger initial bulk damage area and largest exponential growth coefficient of 0.91, 1.1 times that of the 3ω transparent glass melted at a low temperature (1000 °C). They exhibited wave-packed damaged morphologies extending from the rear surface into the glass body. The melting temperatures exhibited the opposite influence regularity for these two investigated fluoride-containing phosphate glasses. The high-temperature (1200 °C) melting process favored the improvement in UV laser-induced damage resistance of the 1ω absorptive glass, as evidenced by the higher UV laser-induced damage threshold and lower damage growth coefficient, while the low-temperature (1000 °C) melting process exerted similar effects on the 3ω transparent glass. © 2024 Elsevier Ltd

  Affiliations:(1) State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences (CAS), Shaanxi, Xi'an; 710119, China; (2) State Key Laboratory of Laser Interaction with Matter, Northwest Institute of Nuclear Technology, Shaanxi, Xi'an; 710024, China; (3) School of Science, Southwest University of Science and Technology, Mianyang; 621010, China; (4) Joint Laboratory for Extreme Conditions Matter Properties, Southwest University of Science and Technology, Mianyang; 621010, China

  Publication Year:2025

  Volume:182

  Article Number:112222

  DOI Link:10.1016/j.optlastec.2024.112222

  数据库ID（收录号）:20244917469617
• Record 55 of
  
  Title:Long-term repetition rate stabilization of soliton microcomb using optical closed-loop injection locking
  
  Author Full Names:Wang, Zhichuang(1,2); Shi, Lei(1,2); Hu, Xiaohong(1,2); Little, Brent E.(1); Chu, Sai T.(3); Wang, Weiqiang(4); Zhang, Wenfu(1,2)

  Source Title:Optics and Laser Technology

  Language:English

  Document Type:Journal article (JA)

  Abstract:We demonstrate an optical closed-loop injection locking technology for the soliton microcomb repetition rate (frep) stabilization. Using the power of the −1st comb line (−1st represents the first comb tooth on the left side of the pump laser) as an error signal, the pump laser frequency is auto-tuned to ensure frep locked at an optimal level. After injection locking for 2 h, the single-sideband (SSB) phase noise of the closed-loop locked frep decreases by 20 dB compared with the open-loop locked frep within the offset frequency range of 20 Hz to 30 kHz. After locking one and a half hours, the Allan deviation of the closed-loop locked frep reaches 1.8 × 10−13@0.1 s, which improves by three orders of magnitude. The experimental results prove the feasibility of the optical closed-loop injection technology for long-term frep stabilization. The proposed scheme has excellent locking performance, simple structure and low cost, which has the potential application for stable microwave generation, precision ranging, etc. © 2024 Elsevier Ltd

  Affiliations:(1) State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) University of Chinese Academy of Sciences, Beijing; 100049, China; (3) Department of Physics, City University of Hong Kong, Hong Kong; (4) School of Electronic Information and Artificial Intelligence, Shaanxi University of Science and Technology, Xi’ an; 710021, China

  Publication Year:2025

  Volume:180

  Article Number:111549

  DOI Link:10.1016/j.optlastec.2024.111549

  数据库ID（收录号）:20243216803766
• Record 56 of
  
  Title:A cascade SPR sensor based on Ag/Au coated coreless optical fiber for RI and pH measurement
  
  Author Full Names:Hu, Linchuan(1); Li, Jianshe(1); Yin, Zhiyong(1); Zhang, Zhibing(1); Li, Hongwei(1); Li, Shuguang(1); Wang, Peng(2); Du, Huijing(1); Wang, Ruiduo(3)

  Source Title:Optics and Laser Technology

  Language:English

  Document Type:Journal article (JA)

  Abstract:Due to the restriction of resonant wavelength, the detection range of traditional two-parameter sensors is greatly limited. To solve this problem, a cascade SPR sensor with Ag/Au coating is proposed to measure refractive index (RI) and pH value. In this paper, coreless optical fiber is used as the sensor probe, and Ag/Au are coated on its surface by a magnetron sputtering method. The two sensing channels of this cascade sensor are independent of each other and have a wide parameter detection range. The effects of sensor length and coating time on the performance of the sensor were investigated, and the optimal sensor length and coating time were determined. The experimental results show that the maximum refractive index sensitivity is 3888.6 nm /RIU in the RI range of 1.333–1.385, and the maximum pH sensitivity is 38.01 nm/pH in the pH range of 3.15–8.86. The sensor has the advantages of strong stability and high integration and has a good application prospect in the fields of biosensing and environmental detection. © 2024

  Affiliations:(1) State Key Laboratory of Metastable Materials Science & Technology and Key Laboratory for Microstructural Material Physics of Hebei Province, School of Science, Yanshan University, Qinhuangdao; 066004, China; (2) State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao; 066004, China; (3) State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences (CAS), Xi'an; 710119, China

  Publication Year:2025

  Volume:180

  Article Number:111452

  DOI Link:10.1016/j.optlastec.2024.111452

  数据库ID（收录号）:20242816693160
• Record 57 of
  
  Title:Metasurface Polarization Optics: Phase Manipulation for Arbitrary Polarization Conversion Condition
  
  Author Full Names:Li, Siqi(1); Chen, Chen(2); Wang, Guoxi(1,3); Ge, Suyang(1,3); Zhao, Jiaqi(1,3); Ming, Xianshun(1); Zhao, Wei(1,3); Li, Tao(2); Zhang, Wenfu(1,3)

  Source Title:Physical Review Letters

  Language:English

  Document Type:Journal article (JA)

  Abstract:Metasurface polarization optics have attracted considerable attention due to their ability to manipulate independently the wave fronts of different polarization channels with subwavelength scale. Previous methods mainly focused on the condition of complete polarization conversion, restricting the application range of metasurface polarization multiplexing. Here, we proposed a generalized framework of phase manipulation for the metasurface polarization optics, which can realize independent phase control and arbitrary energy distribution of different polarization channels for the arbitrary polarization conversion efficiency. Based on this principle, we experimentally demonstrate tripolarization-channel wave-front control for the arbitrary polarization state (elliptical, circular, and linear). The arbitrary energy distribution of different polarization channels has been achieved via varying the polarization conversion efficiency. The proposed framework significantly improves the performance of metasurface in the polarization multiplexing and energy distribution, and expands the application scope of metasurface in the polarization optics. © 2025 American Physical Society.

  Affiliations:(1) State Key Laboratory of Transient Optics and Photonics, Xi'An Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (2) National Laboratory of Solid State Microstructures, Key Laboratory of Intelligent Optical Sensing and Manipulations, Jiangsu Key Laboratory of Artificial Functional Materials, College of Engineering and Applied Sciences, Nanjing University, Nanjing; 210093, China; (3) University of Chinese Academy of Sciences, Beijing; 100049, China

  Publication Year:2025

  Volume:134

  Issue:2

  Article Number:023803

  DOI Link:10.1103/PhysRevLett.134.023803

  数据库ID（收录号）:20250317701285
• Record 58 of
  
  Title:Enhancing Optical Sectioning in Structured Illumination Microscopy With Axially Confined Fringe Modulation
  
  Author Full Names:Li, Jiaoyue(1,2,3); Chen, Xiaofei(1,2,3); Wen, Kai(1,2,3); An, Sha(1,2,3); Zheng, Juanjuan(1,2,3); Ma, Ying(1,2,3); Wang, Xiaofang(1,2,3); Dan, Dan(4); Yao, Baoli(4); Nienhaus, G. Ulrich(5,6,7,8); Gao, Peng(1,2,3)

  Source Title:Laser and Photonics Reviews

  Language:English

  Document Type:Article in Press

  Abstract:Optical sectioning structured illumination microscopy (OS-SIM) is a fast, minimally invasive 3D imaging technique that has found widespread application in the biosciences. It is based on sample illumination with several illumination fringe patterns featuring distinct mutual phase shifts, from which an axially sectioned image is reconstructed. Its optical sectioning capability is commonly attributed to the attenuation of the fringe modulation of light collected from planes displaced from the focal plane. However, in addition to this effect, which is governed solely by the detection optics, optical sectioning can be further enhanced by confining the fringe modulation axially via partially coherent illumination (PCI). To establish guidelines for optimal illumination field shaping, both theoretically and experimentally are investigated, the optical sectioning strength of OS-SIM upon variation of the two key parameters, modulation period and angular spectrum of the incident illumination. By using PCI with OS-SIM, nearly fivefold and 1.4-fold enhanced axial resolution have achieved for scattering (non-fluorescent) and fluorescent samples, respectively. This work elucidates the optical sectioning mechanism of OS-SIM and provides a perspective for further optimization. © 2025 Wiley-VCH GmbH.

  Affiliations:(1) School of Physics, Xi'dian University, Xi'an; 710071, China; (2) Key Laboratory of Optoelectronic Perception of Complex Environment, Ministry of Education, Xi'an; 710071, China; (3) Engineering Research Center of Information Nanomaterials, Universities of Shaanxi Province, Xi'an; 710071, China; (4) State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (5) Institute of Applied Physics, Karlsruhe Institute of Technology, Karlsruhe; 76049, Germany; (6) Institute of Nanotechnology, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen; 76021, Germany; (7) Institute of Biological and Chemical Systems, Karlsruhe Institute of Technology, Eggenstein-Leopoldshafen; 76021, Germany; (8) Department of Physics, University of Illinois at Urbana-Champaign, Urbana; IL; 61801, United States

  Publication Year:2025

  DOI Link:10.1002/lpor.202401697

  数据库ID（收录号）:20250517770273
• Record 59 of
  
  Title:Soliton patterns recognition and searching from a 2 µm intelligent mode-locked fiber laser agent
  
  Author Full Names:Yao, Tianchen(1,2); Qi, Liwen(1); Zheng, Fangfang(1); Zhou, Wei(1,2); Kang, Hui(1,2); Zhu, Qiang(1,2); Song, Xiaozhao(1,2); Liu, Guangmiao(1,2); Xu, Shengzhou(1); Zhang, Qianwei(1); Wang, Haotian(1); Wang, Fei(2); Wang, Yishan(3); Jia, Baohua(4); Shen, Deyuan(1,2)

  Source Title:Optics and Laser Technology

  Language:English

  Document Type:Journal article (JA)

  Abstract:The negative dispersion of silica fibers near 2 µm wavelength leads to formations of attractive soliton-patterns in Thulium-doped mode-locked fiber lasers (TDMLFL), including single-solitons(SS), bound-solitons(BS), multi-solitons(MS), soliton molecules(SM), as well as noise-like pulses(NLP). However, the current manual or physically controlled methods cannot accurately identify and quickly adjust the diverse solitons. Here, we successfully realized the fine identification and automatic searching of continuous waves, Q-switching, noise-like pulses, multi-solitons, and single-solitons by constructing a genetic algorithm based self-tuning pump power and time-spectrum feedback agent in a TDMLFL. The searched SS have a duration of 1.269 ps, a central wavelength of 1966 nm and a typical Kelly-sideband spectrum. The minimum consuming time of globally finding a single-soliton is ∼40 mins, and the corresponding recovery-time is ∼2 mins. To the best of our knowledge, this is the first time that an intelligent searching and recognition of single soliton in 2 µm TDMLFL and also the first report of soliton-patterns fully intelligent identification and searching without prior parameters in soliton mode locked fiber lasers. © 2024 Elsevier Ltd

  Affiliations:(1) Jiangsu Key Laboratory of Advanced Laser Materials and Devices, School of Physics and Electronic Engineering, Jiangsu Normal University, Xuzhou; 221116, China; (2) Jiangsu Institute of Mid Infrared Laser Technology & Applications, Xuzhou; 221000, China; (3) State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an; 710119, China; (4) The Australian Research Council (ARC) Industrial Transformation Training Centre in Surface Engineering for Advanced Materials (SEAM) RMIT University, Melbourne; VIC; 3000, Australia

  Publication Year:2025

  Volume:182

  Article Number:112125

  DOI Link:10.1016/j.optlastec.2024.112125

  数据库ID（收录号）:20244717376605
• Record 60 of
  
  Title:Candle soot nanoparticles covered femtosecond laser-induced graphene toward multifunctional wooden houses
  
  Author Full Names:Yu, Haonan(1); Yin, Kai(1,2); Wang, Lingxiao(1); Song, Xinghao(1); Yang, Pengyu(1); Wu, Tingni(1); Huang, Yin(1); Li, Xun(3); Arnusch, Christopher J.(4)

  Source Title:Carbon

  Language:English

  Document Type:Journal article (JA)

  Abstract:Laser-induced graphene (LIG) is an innovative material that can be used in the construction of smart wood houses due to its high electrical and thermal conductivity. However, potential practical challenges such as fire hazards, and the complexity of daily cleaning are limitations in such an application. In this study, we utilized femtosecond laser direct writing technology to create femtosecond laser-induced graphene (FLIG) on flame retardant cork. The FLIG surface was then coated with multi-scale candle soot particles to incorporate carbon black (CB-FLIG) superhydrophobic surface properties. Here we demonstrate CB-FLIG as a raw material for electronic components in multifunctional wooden houses. The infrared emissivity of the CB-FLIG surface was as high as 97.2 % and the electric heating performance was good. As such, it can be used as an electric heater in the winter, and we achieved room temperature control at a comfortable 24.9 °C with 4 V voltage in a model house. Also, the water contact angle was 151.2°, giving CB-FLIG self-cleaning properties. Ultimately, we demonstrate the application of CB-FLIG in the field of smart home components such as electrical wiring, electric heaters, fire protection, and self-cleaning, increasing functionality while reducing the need for routine maintenance. This study lays a robust foundation for state-of-the-art devices within smart timber houses and significantly propels the development of versatile, interconnected wooden dwellings. © 2024 Elsevier Ltd

  Affiliations:(1) Hunan Key Laboratory of Nanophotonics and Devices, School of Physics, Central South University, Changsha; 410083, China; (2) State Key Laboratory of Precision Manufacturing for Extreme Service Performance, College of Mechanical and Electrical Engineering, Central South University, Changsha; 410083, China; (3) State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics of CAS, Xi'an; 710119, China; (4) Department of Desalination and Water Treatment, Zuckerberg Institute for Water Research, The Jacob Blaustein Institutes for Desert Research, Ben-Gurion University of the Negev, Sede-Boqer Campus, Midreshet Ben-Gurion, 84990, Israel

  Publication Year:2025

  Volume:233

  Article Number:119853

  DOI Link:10.1016/j.carbon.2024.119853

  数据库ID（收录号）:20244817447614